Abstract
Smart materials, such as thin‐film piezoelectric polymers, are interesting for potential applications on Gossamer spacecraft. This investigation aims to predict the performance and long‐term stability of the piezoelectric properties of poly(vinylidene fluoride) (PVDF) and its copolymers under conditions simulating the low‐Earth‐orbit environment. To examine the effects of temperature on the piezoelectric properties of PVDF, poly(vinylidenefluoride‐co‐trifluoroethylene), and poly(vinylidenefluoride‐co‐hexafluoropropylene), the d33 piezoelectric coefficients were measured up to 160 °C, and the electric displacement/electric field (D–E) hysteresis loops were measured from −80 to +110 °C. The room‐temperature d33 coefficient of PVDF homopolymer films, annealed at 50, 80, and 125 °C, dropped rapidly within a few days of thermal exposure and then remained unchanged. In contrast, the TrFE copolymer exhibited greater thermal stability than the homopolymer, with d33 remaining almost unchanged up to 125 °C. The HFP copolymer exhibited poor retention of d33 at temperatures above 80 °C. In situ D–E loop measurements from −80 to +110 °C showed that the remanent polarization of the TrFE copolymer was more stable than that of the PVDF homopolymer. D–E hysteresis loop and d33 results were also compared with the deflection of the PVDF homopolymer and TrFE copolymer bimorphs tested over a wide temperature range. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1310‐1320, 2005