Abstract
This study demonstrates the successful application of passive seismic interferometry, specifically through the autocorrelation function, to extract high-resolution P-wave reflections from seismic data acquired during hydraulic fracturing. This application demonstrates the efficacy of extracting high-resolution P-wave reflectivity using hydraulic fracturing-induced seismic noise, a previously underexplored source for exploration-scale imaging. Stacking these reflections allows the construction of seismic sections at zero offsets. Typically, this technique uses data based on environmental noise and earthquakes. However, this study used measurements obtained during hydraulic fracturing in the Potiguar Basin of Northeast Brazil. We applied a processing sequence that included the Gaussian Smoother Filter to generate a smoothed amplitude spectrum and to extract the best body-wave component of Green’s function. We whitened the spectrum to remove any unwanted effects from the sources. The resulting seismic sections were compared with seismic lines acquired near the study area and interpreted in light of the available geological information. The seismic images were constructed in 2D and projected into 3D, with reflectors exhibiting high resolution and lateral continuity. Deeper reflectors align well with available geological and geophysical data; however, validation of the shallowest boundaries remains limited by the absence of high-resolution reference data in this area. The estimated time depth reached 2s. Validation of the shallowest reflectors (< 500 m depth, corresponding to the Cenozoic cover and upper Jandaíra Formation) is limited by the absence of high-resolution geological data at the survey site. No shallow boreholes or outcrop transects are available to confirm the depth and continuity of these interfaces. Legacy active seismic lacks resolution above ≈300 m depth. Consequently, our interpretation of shallow reflectors relies on regional geological maps and extrapolation from nearby wells, introducing uncertainty. Future work should include shallow drilling or high-resolution GPR surveys to validate the uppermost 500 m of the autocorrelation sections. Additionally, the maximum penetration depth of the S-wave velocity model (approximately 180 m) is constrained by the short maximum offset (1,450 m), precluding integration with deeper autocorrelation-derived reflectivity. We calculated cross-correlations using two configurations—one with the longest available offset (1,450 m) and one within a single line—to obtain S-wave velocity models and determine the maximum penetration depth (approximately 180 m) achievable with the current acquisition geometry.

This publication has 33 references indexed in Scilit: