Development and Process Integration of an Alternative Demoulding System for High-Pressure Die Casting Using a Contoured Vacuum Mask
Open Access
Abstract
This study presents the development and process integration of an alternative demoulding system for high-pressure die casting. The system is aimed at the removal of large structural castings, which are becoming increasingly popular in the industry under the terms mega- and gigacasting. The development differs from conventional systems in the fact that it completely avoids ejectors and realises the demoulding via the principle of vacuum suction cups. Preliminary tests were carried out in which various established materials for vacuum cups were initially identified and the suitability of the selected cup concept was investigated by varying influencing variables from the high-pressure die casting. These tests showed that a suction pad material combination of an elastomer with a thermal barrier and an aramid felt on the surface provides the best results under the given process boundary conditions. Based on this, a multi-segmented vacuum mask with contour adaptation to the casting to be removed was developed. This vacuum mask is used to build up the holding force between the casting and the removal device. The necessary removal force is applied via pneumatic cylinders. The functional capability of the concept and the system integration was verified by experiments on a real die-casting mould for test specimens. The shrinkage and demoulding process can be successfully modelled in the simulation and the real measured demoulding force is only approx. 15% higher than in the simulation. During demoulding in the high-pressure die-casting process, vacuums of up to 88.7% were achieved at temperatures up to 395 °C.Keywords
Funding Information
- “Industry Promoting Group” of the Department of Foundry Technology
This publication has 10 references indexed in Scilit:
- Challenges in Geometry Assurance of Megacasting in the Automotive IndustryJournal of Computing and Information Science in Engineering, 2023
- Advances in Metal Casting Technology: A Review of State of the Art, Challenges and Trends—Part I: Changing Markets, Changing ProductsMetals, 2022
- Vacuum Suction Cup Modeling for Evaluation of Sealing and Real-Time SimulationIEEE Robotics and Automation Letters, 2022
- The Study of the Effective Contact Area of Suction CupSAE International Journal of Advances and Current Practices in Mobility, 2021
- Physics of suction cupsSoft Matter, 2019
- Experimental Investigations on the Ejector Forces in the Die Casting ProcessArchives of Foundry Engineering, 2018
- Thermo fatigue cracking of die casting diesEngineering Failure Analysis, 2012
- Handbook of Specialty Elastomers2008
- Thermal expansion and temperature dependence of elastic moduli of aromatic polyamidesMacromolecules, 1994
- Fertigungsoptimierung dünnwandiger Gussteile aus Leichtmetall : Schlußbericht ; Verbundprojekt FOGL ; Verbundprojekt im Rahmen des BMBF-Förderprogramms "Forschung für die Produktion von morgen"