Characteristics of fine processed construction and demolition waste in Japan and method to obtain fines having low gypsum component and wood contents
Authors:
- 11 September 2009
- journal article
- research article
- Published by SAGE Publications in Waste Management & Research: The Journal for a Sustainable Circular Economy
- Vol. 28 (7) , 634-646
Abstract
A method to obtain processed residue from mixed construction and demolition waste (mixed C&D-W) — free from environmental pollutants — for deposition in landfill is discussed. In particular, additional sieving, the presence of gypsum board in mixed C&D-W at the first stage of manual presorting, and the color of processed residue were studied for the basic characterization of the different fractions. Considerable precautions should be taken to prevent leaching of hazardous substances, such as T-Hg, Pb, Cr6+, As, and fluoride and its compounds, when processed residue, particularly in crushed fraction at an intermediate treatment facility, is used as construction material. A relatively high content of gypsum was noted in processed residue generated at demolition work compared to that generated at construction work in processed residue from mixed C&D-W in which the presence of gypsum board was observed at the first stage of manual presorting, and in white processed residue. Additional sieving for removal was ineffective because gypsum and wood have wide particle size distributions. To obtain processed residue having low gypsum and wood contents, white processed residue should be removed to eliminate gypsum (content, 59% of initial sample), and brown or brown and yellow processed residue should be removed to eliminate wood (content, 32% of initial sample) without mixing with processed residue containing other colors at stockyards. The removed residue should be deposited in a controlled-type landfill site.Keywords
This publication has 20 references indexed in Scilit:
- Investigation on the components removed in loss on ignition test of sandy crushed construction and demolition wasteWaste Management & Research: The Journal for a Sustainable Circular Economy, 2009
- Measuring the gypsum content of C&D debris finesWaste Management, 2008
- Estimation of regional building-related C&D debris generation and composition: Case study for Florida, USWaste Management, 2007
- Reduced sulfur compounds in gas from construction and demolition debris landfillsWaste Management, 2006
- Recycling of construction and demolition waste materials: a chemical–mineralogical appraisalWaste Management, 2005
- Environmental management of construction and demolition waste in KuwaitWaste Management, 2004
- Recycling of construction and demolition waste via a mechanical sorting processResources, Conservation and Recycling, 2002
- Sulfate leaching from recovered construction and demolition debris finesAdvances in Environmental Research, 2001
- Material Balance of a Construction Waste Sorting PlantWaste Management & Research: The Journal for a Sustainable Circular Economy, 1993
- A consistent set of parametric models for the two‐phase flow of immiscible fluids in the subsurfaceWater Resources Research, 1989