Wear of rotary plows operating in a tropical clay loam soil
Open Access
- 1 August 2013
- journal article
- Published by FapUNIFESP (SciELO) in Engenharia Agrícola
- Vol. 33 (4) , 772-781
Abstract
The wear resistance of rotary plows operating in a clay loam soil was studied. The degree of damage caused to the soil and the amount of mass lost by the tools were determined in order to establish correlations between the physical properties of the soil and the wear mechanisms acting on the tribosystem. Field tests were carried out in 12 plots and a randomized experimental design with 4 levels, 3 replicas per level and 2 passes per plot was applied. The levels relate to the tillage implements employed: rotary tiller, rotary power harrow, small motorized rotary tiller and control (unaltered soil). The highest mass losses were measured in rotary tiller and rotary power harrow's tools, while the small motorized rotary tiller's tools showed generally lower levels of damage. It was determined that the effective contact time between tool and soil, the rotating speed and the sudden impact forces are the most significant factors affecting the wear resistance in field operations. Thirty days after tillage operation the soil samples were taken from each plot at a mean depth of 100 mm in order to determine bulk density, gravimetric moisture content and percentage of aggregates smaller than 5 mm. No significant differences among the values of these properties were found in the experiments. The wear mechanisms acting on the tools' surface are complex and include 2-body and 3-body abrasion as well as the presence of sudden impact forces.Keywords
This publication has 10 references indexed in Scilit:
- Soil CO2 emission as related to incorporation of sugarcane crop residues and aggregate breaking after rotary tillerEngenharia Agrícola, 2011
- Long-term effects of tillage on stratification and plant availability of phosphate and potassium in a loess chernozemSoil and Tillage Research, 2011
- Thermally enhanced machining of hard-to-machine materials—A reviewInternational Journal of Machine Tools and Manufacture, 2010
- Effects of Cu and B addition on microstructure and mechanical properties of high-strength bainitic steelsMaterials Science and Engineering: A, 2009
- Effect of mulch and tillage system on soil porosity under wheat (Triticum aestivum)Soil and Tillage Research, 2008
- Wear resistance of thermally sprayed rotary tiller bladesWear, 2007
- Characterization of wear and metallurgical properties for development of agricultural grade steel suitable in specific soil conditionsWear, 2007
- Agregação de um latossolo vermelho submetido a cinco sistemas de preparo do solo em Uberaba - MGEngenharia Agrícola, 2007
- Fine-scale microstructural investigations of warm rolled low-carbon steels with and without Cr, P, and B additionsActa Materialia, 2006
- Reduction of wear via hardfacing of chisel ploughshareTribology International, 2006