Oxidation of cyanogen. I. Ignition behind reflected shocks

Authors:

Abstract
The ignition of cyanogen in cyanogen‐oxygen‐argon mixtures, and the distribution of reaction products before and after ignition, were studied behind reflected shocks in a single pulse shock tube. The measurements covered the temperature range 1400–2000°K at pressures P5 varying from roughly 5 to 24 atm. The composition of the reaction mixtures varied from 3.0 to 9.0% C2N2 and 3.0 to 10.5% O2. Under these conditions, the observed induction times ranged between 15 and 450 μsec. A least squares analysis of approximately 150 tests yielded the following empirical relation: τ = 10−13.97 exp(34 700/RT)[C2N2]−1.01 [O2]−0.21[Ar]+0.22, where τ is given in seconds and concentrations are in moles per cubic centimeter. An additional twenty‐three tests were run, in which 1% hydrogen was added to a stoichiometric mixture of 8.6% C2N2 and 8.6% O2. The ignition delay times under these conditions were considerably shorter and the temperature dependence was found to be much weaker, 23.7 compared to 34.7 kcal/mole in the absence of hydrogen. In a number of tests, samples were taken from the shock tube and examined for product distribution. These were taken before and after ignition and analyzed by mass spectrometry. In stoichiometric mixtures, the main products before ignition are N2, CO, and some CO2, which disappears after ignition. In mixtures with excess oxygen, the products following ignition are CO2, N2, and some CO.

This publication has 8 references indexed in Scilit: