Abstract
The objective of this study was to assess the impact on energy performance that different architectural forms for BIPV systems integrated into parking lots and the influence of the electrical connection configuration adopted. The analysis was performed for a photovoltaic installation of approximately 450 kWp to be installed in the parking lot at Candido Portinari park, in Sao Paulo/SP. Different architectural canopy shapes were analyzed: inclined flat; half-circle arc, with modules installed with tilt angle between 0 ° to 30 °; quarter-circle arc with the modules installed with tilt angle between 5º to 30º and a "V" shaped format. Additionally, tilt angles of 6º, 10º and 20º was considered for inclined flat and "V" shape formats. Simulations were performed with the PVsyst V6.38 software and the results were analyzed based on three metrics: the total energy produced in kWh, specific production and performance ratio (PR). The results indicates that the most appropriate shape is the inclined flat canopy with 6º tilt angle , however the quarter-circle arc and "V" format with tilt angle between 6º to 10º and inclined flat with tilt angle of 10º also showed total energy produced close to the inclined flat canopy with 6º tilt angle: -3.3%, -1.5%, -2.3% e -0.2% respectively, showing to be feasible to adopt projects with architectural forms differentiated BIPV projects for parking lot. O objetivo deste trabalho é avaliar o impacto no desempenho energético que diferentes formas arquitetônicas para sistemas BIPV integrados a estacionamentos e a influência da topologia elétrica adotada. A análise foi realizada para uma instalação fotovoltaica de aproximadamente 450 kWp a ser instalada no estacionamento do Parque Cândido Portinari, em São Paulo/SP. Diferentes formatos arquitetônicos foram analisados, como o formato de plano inclinado, curvado de calha circular com os módulos instalados com inclinação entre 0º a 30º, curvado de meia calha circular com os módulos instalados com inclinação entre 5º a 30º e em forma de “V”, considerando-se os ângulos de inclinação (tilt) de 6º, 10 e 20º para os formatos de plano inclinado e em forma de “V”. Com o modelo 3D da planta e com os formatos propostos, foram realizadas simulações com o software PVsyst V6.38 e os resultados foram analisados considerando três métricas: a energia total produzida em kWh, a produção específica e o performance ratio (PR). O resultado deste estudo indica que o formato mais adequado é o de plano inclinado com ângulo de inclinação de 6º, entretanto os formatos de meia calha circular e em forma de “V” com inclinação entre 6º a 10º e plano inclinado com inclinação de 10º também apresentaram desempenho de energia total produzida próximos ao formato de plano inclinado com ângulo de inclinação de 6º: -3,3%, -1,5%, -2,3% e -0,2% respectivamente, demonstrando ser viável a adoção de projetos com formas arquitetônicas diferenciadas em projetos de BIPV para estacionamentos.

This publication has 10 references indexed in Scilit: