Controlling the Synthesis of Polyurea Microcapsules and the Encapsulation of Active Diisocyanate Compounds
Open Access
Abstract
The encapsulation of active components is currently used as common methodology for the insertion of additional functions like self-healing properties on a polymeric matrix. Among the different approaches, polyurea microcapsules are used in different applications. The design of polyurea microcapsules (MCs) containing active diisocyanate compounds, namely isophorone diisocyanate (IPDI) or hexamethylene diisocyanate (HDI), is explored in the present work. The polyurea shell of MCs is formed through the interfacial polymerization of oil-in-water emulsions between the highly active methylene diphenyl diisocyanate (MDI) and diethylenetriamine (DETA), while the cores of MCs contain, apart from IPDI or HDI, a liquid Novolac resin. The hydroxyl functionalities of the resin were either unprotected (Novolac resin), partially protected (Benzyl Novolac resin) or fully protected (Acetyl Novolac resin). It has been found that the formation of MCs is controlled by the MDI/DETA ratio, while the shape and size of MCs depends on the homogenization rate applied for emulsification. The encapsulated active compound, as determined through the titration of isocyanate (NCO) groups, was found to decrease with the hydroxyl functionality content of the Novolac resin used, indicating a reaction between NCO and the hydroxyl groups. Through the thorough investigation of the organic phase, the rapid reaction (within a few minutes) of MDI with the unprotected Novolac resin was revealed, while a gradual decrease in the NCO groups (within two months) has been observed through the evolution of the Attenuated Total Reflectance—Fourier-Transform Infrared (ATR-FTIR) spectroscopy and titration, due to the reaction of these groups with the hydroxyl functionalities of unprotected and partially protected Novolac resin. Over longer times (above two months), the reaction of the remaining NCO groups with humidity was evidenced, especially when the fully protected Acetyl Novolac resin was used. HDI was found to be more susceptible to reactions, as compared with IPDI.Keywords
Funding Information
- European Regional Development Fund of the European Union and Greek national funds through the Operational Program Competitiveness, Entrepreneurship and Innovation (T2EΔΚ-00307)
This publication has 34 references indexed in Scilit:
- Self-healing isocyanate microcapsules for efficient restoration of fracture damage of polyurethane and epoxy resinsJournal of Materials Science, 2019
- Facile and cost-effective synthesis of isocyanate microcapsules via polyvinyl alcohol-mediated interfacial polymerization and their application in self-healing materialsComposites Science and Technology, 2017
- Emulsion-templated poly(acrylamide)s by using polyvinyl alcohol (PVA) stabilized CO2-in-water emulsions and their applications in tissue engineering scaffoldsRSC Advances, 2015
- Self-healing polymeric materials based on microencapsulated healing agents: From design to preparationProgress in Polymer Science, 2015
- Double-layered reactive microcapsules with excellent thermal and non-polar solvent resistance for self-healing coatingsJournal of Materials Chemistry A, 2015
- Synthesis of HDI/IPDI hybrid isocyanurate and its application in polyurethane coatingProgress in Organic Coatings, 2015
- Comparative Study on High-Intensity Ultrasound and Pressure Milk Homogenization: Effect on the Kinetics of Yogurt Fermentation ProcessFood and Bioprocess Technology, 2014
- Facile microencapsulation of HDI for self-healing anticorrosion coatingsJournal of Materials Chemistry, 2011
- Fabrication of a high-strength hydrogel with an interpenetrating network structureColloids and Surfaces A: Physicochemical and Engineering Aspects, 2009
- Comparison of the preparation of PLGA–BSA nano- and microparticles by PVA, poloxamer and PVPColloids and Surfaces A: Physicochemical and Engineering Aspects, 2008