Patterning, integration and characterisation of polymer optical oxygen sensors for microfluidic devices
- 23 June 2008
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Lab on a Chip
- Vol. 8 (8) , 1300-1307
Abstract
This paper describes a process for the layer-by-layer fabrication and integration of luminescent dye-based optical oxygen sensors into microfluidic devices. Application of oxygen-sensitive platinum(II) octaethylporphyrin ketone fluorescent dye dissolved in polystyrene onto glass substrates by spin-coating was studied. Soft lithography with polydimethylsiloxane (PDMS) stamps and reactive ion etching in oxygen plasma were used to produce sensor patterns with a minimum feature size of 25 μm. Sensors patterns were integrated into a PDMS microfluidic device by plasma bonding. No degradation of the sensor response as a result of the lithography and pattern-transfer processes was detected. Gaseous and dissolved oxygen (DO) detection was characterised using fluorescence microscopy. The intensity signal ratio of the sensor films was found to increase almost two-fold from 3.6 to 6.8 by reducing film thickness from 1.3 μm to 0.6 μm. Calibration of DO measurement showed linear Stern–Volmer behaviour that was constant for flow rates from 0.5 to 2 mL min−1. The calibrated sensors were subsequently used to demonstrate laterally resolved detection of oxygen inside a microfluidic channel. The fabrication process provides a novel, easy to use method for the repeatable integration of optical oxygen sensors into cell-culture and lab-on-a-chip devices.Keywords
This publication has 33 references indexed in Scilit:
- Design and fabrication of a multilayered polymer microfluidic chip with nanofluidic interconnects via adhesive contact printingLab on a Chip, 2006
- Optical imaging in microfluidic bioreactors enables oxygen monitoring for continuous cell cultureJournal of Biomedical Optics, 2006
- Development of an integrated microfluidic platform for dynamic oxygen sensing and delivery in a flowing mediumLab on a Chip, 2005
- Phosphorescent oxygen-sensitive materials for biological applicationsJournal of Materials Chemistry, 2005
- Optimising oxygen-sensitivity of optical sensor using pyrene carboxylic acid by myristic acid co-chemisorption onto anodic oxidized aluminium plateTalanta, 2004
- Probes and Polymers for Optical Sensing of OxygenMicrochimica Acta, 2003
- Effects of Polymer Matrices on Calibration Functions of Luminescent Oxygen Sensors Based on Porphyrin Ketone ComplexesAnalytical Chemistry, 1996
- Fibre optic oxygen sensor based on fluorescence quenching of evanescent-wave excited ruthenium complexes in sol–gel derived porous coatingsThe Analyst, 1993
- Oxygen-permselectivity in new type polyorganosiloxanes with carboxyl group on the side chainPolymer Bulletin, 1990
- Organosilicon monomers for plasma-developed x-ray resistsJournal of Vacuum Science and Technology, 1981