Effect of prior stress-relief on the gliding of indentation dislocations on silicon wafers
Authors:
- Zhao Ze-GangZZZhao Ze-Gang
- Tian Da-XiTDTian Da-Xi
- Zhao JianZJZhao Jian
- Liang Xing-BoLXLiang Xing-Bo
- Ma Xiang-YangMXMa Xiang-Yang
- Yang De-RenYDYang De-Ren
- Ningbo 315800 Ql Electronic Co. LtdNLNingbo 315800 Ql Electronic Co. Ltd
- 1 January 2015
- journal article
- Published by Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences in Acta Physica Sinica
- Vol. 64 (20) , 208101
Abstract
The mechanical strengths of silicon wafers are crucial for the manufacturing yield of integrated circuits (ICs), which have received intensive attention over the years. With reducing the feature size of ICs, the mechanical strengths of silicon wafers become more significant. Actually, the gliding of indentation dislocations on single-crystalline silicon wafers at a given temperature reflects the mechanical strengths of silicon wafers. Since the gliding of indentation dislocations is driven by the residual stress around the indentation, the investigation on the correlation between the residual stress and dislocation gliding is of significance. In this paper, we first use micro-Raman microscopy to characterize the relief of stress around the indentation due to the annealling at 300 or 500 ℃. Then the effect of such a relief-stress on the gliding of indentation dislocations at 700-900 ℃ is investigated. In the case without the prior stress-relief, the indentation dislocations glide to the maximum distance after 2 h annealling at 700-900 ℃. With the prior stress-relief due to the annealling at 300 or 500 ℃, the indentation dislocations can still glide to the maximum distance after 2 h annealling at 900 ℃, however the gliding velocity significantly decreases and the gliding distance is remarkably reduced after 2 h annealling at 700 or 800 ℃. Such a reduction of gliding distance is most significant in the case of 700 ℃ annealling following the stress-relief with the 500 ℃/2 h annealling. Despite the prior stress-relief, as long as the annealing time at 700 or 800 ℃ is sufficiently extended, the indentation dislocations can glide to the maximum distance. In view of the above results, it is believed that the maximum gliding distance of indentation dislocations at a given temperature is independent of the values of residual stress around the indentation provided that the residual stresses are larger than the critical stress for driving the dislocation movement. Nevertheless, the annealing time for achieving the maximum gliding distance at a given temperature should be remarkably extended as the residual stresses around the indentation are relieved.Keywords
This publication has 17 references indexed in Scilit:
- Immobilization of dislocations by oxygen precipitates in Czochralski silicon: Feasibility of precipitation strengthening mechanismJournal of Crystal Growth, 2011
- The effect of impurity-induced lattice strain and Fermi level position on low temperature oxygen diffusion in siliconJournal of Applied Physics, 2011
- Effect of oxygen precipitates on dislocation motion in Czochralski siliconJournal of Crystal Growth, 2010
- Strength and sharp contact fracture of siliconJournal of Materials Science, 2006
- The investigation of microsystems using Raman spectroscopyOptics and Lasers in Engineering, 2001
- Dislocation dynamics and mechanical behaviour of elemental and compound semiconductorsPhysica Status Solidi (a), 1993
- Eutectoid decomposition mechanisms in hypoeutectoid Ti-X alloysJournal of Materials Science, 1988
- A method for finding critical stresses of dislocation movementApplied Physics Letters, 1977
- Effect of oxygen on dislocation movement in siliconJournal of Applied Physics, 1975
- On indentation dislocation rosettes in siliconJournal of Applied Physics, 1975