Stepped-shoulder friction stir welding to alleviate weld thinning for dissimilar AA2195-T8/AA2219-T6 alloys
Authors:
- 23 September 2021
- journal article
- research article
- Published by SAGE Publications in Science and Technology of Welding and Joining
- Vol. 26 (8) , 599-605
Abstract
A stepped-shoulder friction stir welding tool containing a protruding inner shoulder and an outer shoulder was proposed to join AA2195-T8 Al-Cu-Li and AA2219-T6 Al-Cu alloys. The inner shoulder with a considerable plunge depth enhanced forging effect, and the outer shoulder with a low plunge depth prevented plasticized materials from overflowing out of welds, while the pin with milling facet promoted material flow. The sound joint with a weld thinning of 0.05 mm (about 0.8% of the workpiece) was obtained. The interface between the two materials was free of cavities and kissing bond. The joint fractured in thermo-mechanically affected zone on the side of AA2219-T6 alloy. The tensile strength reached 352 MPa, equal to 81.7% of base AA2219-T6 alloys.Keywords
Funding Information
- Heilongjiang Provincial Postdoctoral Science Foundation (LBH-Z20055)
- Natural Science Foundation of Heilongjiang Province (JJ2020JQ085)
- National Natural Science Foundation of China (52175301, 52001099)
This publication has 35 references indexed in Scilit:
- Mechanical and microstructural behavior of friction stir welded similar and dissimilar sheets of AA2219 and AA7475 aluminium alloysJournal of Alloys and Compounds, 2017
- Modeling over-ageing in Al-Mg-Si alloys by a multi-phase CALPHAD-coupled Kampmann-Wagner Numerical modelActa Materialia, 2017
- Effect of lap configuration on magnesium to aluminum friction stir lap welding assisted by external stationary shoulderMaterials & Design, 2016
- Global and local mechanical properties and microstructure of Bobbin tool friction-stir-welded Al–Li alloyScience and Technology of Welding and Joining, 2016
- Experimental Study of Stationary Shoulder Friction Stir Welded 7N01-T4 Aluminum AlloyJournal of Materials Engineering and Performance, 2016
- Friction Stir Welding of a Thick Al-Zn-Mg Alloy PlateJournal of Materials Engineering and Performance, 2016
- Joint features and mechanical properties of friction stir lap welded alclad 2024 aluminum alloy assisted by external stationary shoulderMaterials & Design, 2016
- Optimizing weld quality of a friction stir welded aluminum alloyJournal of Materials Processing Technology, 2015
- Formation and mechanical properties of stationary shoulder friction stir welded 6005A-T6 aluminum alloyMaterials & Design (1980-2015), 2014
- Defect features and mechanical properties of friction stir lap welded dissimilar AA2024–AA7075 aluminum alloy sheetsMaterials & Design (1980-2015), 2014