Uniaxial Tensile Stress–Strain Behavior of Carbon-Fiber Grid–Reinforced Engineered Cementitious Composites
- 1 December 2018
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Composites for Construction
- Vol. 22 (6)
Abstract
Carbon fiber–reinforced polymer (CFRP) grid–reinforced engineered cementitious composites (ECC) have been developed as an alternative to epoxy resin–based FRP plates for the strengthening of concrete structures. To broaden the application of this new composite material for seismic retrofit and strengthening of reinforced concrete elements, an experimental study, including three nonreinforced ECC plates and 30 CFRP grid–reinforced ECC (CFRP-ECC) hybrid plates, was conducted to investigate their mechanical performance under both monotonic and cyclic uniaxial tensile loads. The stiffness of the internal CFRP grid and loading scheme were the two primary test variables. Test results showed that all CFRP-ECC plates failed with a dominate crack in the ECC matrix and rupture of the internal CFRP grid. The envelopes of the cyclic tensile stress–strain curves followed the static stress–stain curves regardless of the cyclic loading scheme adopted. A nonlinear stress–strain model is proposed to model the unloading/reloading paths of CFRP-ECC plates under cyclic uniaxial tensile loading.Keywords
This publication has 21 references indexed in Scilit:
- Fatigue and post-fatigue behavior of PBO FRCM-concrete jointsInternational Journal of Fatigue, 2015
- Finite Element Modeling of Insulated FRP-Strengthened RC Beams Exposed to FireJournal of Composites for Construction, 2015
- Study on an Improved Phosphate Cement Binder for the Development of Fiber-Reinforced Inorganic Polymer CompositesPolymers, 2014
- Cyclic Compressive Behavior of Concrete Confined with Large Rupture Strain FRP CompositesJournal of Composites for Construction, 2014
- Non-linear analytical model of composites based on basalt textile reinforced mortar under uniaxial tensionComposites Part B: Engineering, 2013
- Intermediate crack-induced debonding in RC beams externally strengthened with prestressed FRP laminatesJournal of Reinforced Plastics and Composites, 2013
- Numerical modeling and analysis of ECC structuresMaterials and Structures, 2012
- Fiber reinforced cement-based composite system for concrete confinementConstruction and Building Materials, 2012
- Stress–strain model for FRP-confined concrete under cyclic axial compressionEngineering Structures, 2009
- Unloading and Reloading Stress–Strain Model for Confined ConcreteJournal of Structural Engineering, 2006