Multi-input–multi-output optimization of reactivity-controlled compression-ignition combustion in a heavy-duty diesel engine running on natural gas/diesel fuel
Authors:
- 26 February 2019
- journal article
- research article
- Published by SAGE Publications in International Journal of Engine Research
- Vol. 21 (3) , 470-483
Abstract
The aim of this study is to implement the multi-input–multi-output optimization of reactivity-controlled compression-ignition combustion in a heavy-duty diesel engine running on natural gas and diesel fuel. A single-cylinder heavy-duty diesel engine with a modified bathtub piston bowl profile is set on operation at 9.4 bar indicated mean effective pressure and running at a fixed engine speed of 1300 r/min. A certain amount of diesel fuel mass per cycle is fed into the engine at a fixed equivalence ratio without any exhaust gas recirculation. The optimization targets include reduction in engine emissions as much as possible, avoiding diesel knock occurrence, and achieving low temperature combustion concept with the least or no engine power losses. To implement the optimization, the effects of three control factors on the engine performance are assessed by the design of experiment concept—fractional factorial method. These selected control factors are intake temperature and intake pressure (both at intake valve closing) and the diesel fuel start of injection timing. Some randomized treatment combinations of chosen levels from the three selected control factors are employed to simulate reactivity-controlled compression-ignition combustion. Based on the engine’s responses derived from the simulation, reactivity-controlled compression-ignition combustion’s mathematical model is identified directly using an artificial neural network. Next, an optimization process is conducted using two different optimization algorithms, namely, genetic algorithm and particle swarm optimization algorithm. For assessing and validating the obtained optimal results, the obtained data are used to simulate reactivity-controlled compression-ignition combustion as the engine input factors. The results show that the proposed artificial neural network design is effectively capable of identifying reactivity-controlled compression-ignition combustion’s mathematical model. Also, by optimizing reactivity-controlled compression-ignition combustion through different optimization algorithms, the optimal range of the engine operation at 9.4 bar indicated mean effective pressure is well estimated and extended.Keywords
This publication has 25 references indexed in Scilit:
- Progress and recent trends in reactivity-controlled compression ignition enginesInternational Journal of Engine Research, 2015
- Evaluating temperature and fuel stratification for heat-release rate control in a reactivity-controlled compression-ignition engine using optical diagnostics and chemical kinetics modelingCombustion and Flame, 2015
- Review of high efficiency and clean reactivity controlled compression ignition (RCCI) combustion in internal combustion enginesProgress in Energy and Combustion Science, 2015
- Parametric study and optimization of a RCCI (reactivity controlled compression ignition) engine fueled with methanol and dieselEnergy, 2014
- Comparison of Low Temperature Combustion Strategies for Advanced Compression Ignition Engines with a Focus on ControllabilityCombustion Science and Technology, 2014
- Optimization of diesel engine parameters using Taguchi method and design of evolutionJournal of the Brazilian Society of Mechanical Sciences and Engineering, 2012
- Reactivity Controlled Compression Ignition Using Premixed Hydrated Ethanol and Direct Injection DieselJournal of Engineering for Gas Turbines and Power, 2012
- Fuel reactivity controlled compression ignition (RCCI): a pathway to controlled high-efficiency clean combustionInternational Journal of Engine Research, 2011
- Development of an optimized chemical kinetic mechanism for homogeneous charge compression ignition combustion of a fuel blend of n-heptane and natural gas using a genetic algorithmProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2010
- Application of artificial neural network to predict specific fuel consumption and exhaust temperature for a Diesel engineApplied Thermal Engineering, 2006