Preparation and Swelling Inhibition of Mixed Metal Hydroxide to Bentonite Clay
Open Access
Abstract
In this paper, mixed metal hydroxide (MMH) was prepared via MgCl2 and AlCl3 by the co-precipitation method and characterized by XRD, TGA laser and particle size analysis. The inhibitory effect of MMH on the swelling of clay was evaluated by linear expansion, mud ball, laser particle size analysis, X-ray diffraction analysis and TGA. The linear expansion experiment showed that MMH with a ratio of Mg:Al = 3:1 displayed a strong inhibitory effect on bentonite expansion when 0.3% MMH was added to the drilling fluid, demonstrating better inhibition than 4.0% KCl. Within 48 h, only a few cracks were visible on the mud ball surface in the 0.3% MMH suspension, which indicates that MMH can inhibit wet bentonite for deep hydration. X-ray diffraction and particle size analyses of bentonite were conducted before and after MMH was added to illustrate the inhibition. MMH also displayed high temperature resistance in water-based drilling fluid as a shear strength-improving agent, and its dynamic plastic ratio and shear force were stable after aging at 200 °C for 16 h.Keywords
Funding Information
- Shaanxi Provincial Key Research and Development Program (2019GY-136)
- Key Scientific Research Program of Shaanxi Provincial Department of Education (21JY035)
- Agentúra na Podporu Výskumu a Vývoja (APVV-18-0075)
- Slovak Grant Agency VEGA (No. 2/0166/21)
This publication has 26 references indexed in Scilit:
- Internal and External Atomic Steps in Graphite Exhibit Dramatically Different Physical and Chemical PropertiesACS Nano, 2015
- The effect of particle size of clay on the viscosity build up property of mixed metal hydroxides (MMH) in the low solid-drilling mud compositionsApplied Clay Science, 2013
- Ca/Na Montmorillonite: Structure, Forces and Swelling PropertiesLangmuir, 2010
- Synthesis and characterization of layered double hydroxides with a high aspect ratioJournal of Solid State Chemistry, 2006
- Review of the synthesis of layered double hydroxides: a thermodynamic approachQuímica Nova, 2004
- Synthesis and characterization of sol–gel Mg/Al and Ni/Al layered double hydroxides and comparison with co-precipitated samplesMicroporous and Mesoporous Materials, 2000
- Formation-Damaging Characteristics of Mixed Metal Hydroxide Drill-In Fluids and a Comparison With Polymer-Base FluidsSPE Drilling & Completion, 1999
- Study on the preparation and structure of positive sol composed of mixed metal hydroxideColloid and Polymer Science, 1996
- Anionic surfactants between double metal hydroxide layersJournal of Colloid and Interface Science, 1988
- The nature of the thermal decomposition of a catalytically active anionic clay mineralJournal of Catalysis, 1986