Measurements of the Tip-Leakage Flow in a Turbine Cascade With Large Clearances
Authors:
Open Access
- 5 June 1995
- conference paper
- Published by ASME International
Abstract
Measurements have been made for tip clearances up to 15% of chord in a turbine cascade which has been used previously to study the tip-leakage flow at smaller clearances. The work is part of a study of the aerodynamics of turbines which have experienced in-service damage and is related to Engine Health Monitoring. Detailed flow field measurements have been made upstream and downstream of the cascade and static pressure distributions have been measured on the endwall and at the midspan of the blade. The most unexpected result was that the blade end losses (that is, the sum of the secondary and tip-leakage losses) reached a maximum for a clearance of about 6% of chord. At the largest clearance of 15%, the end losses were substantially reduced and were in fact comparable with the secondary losses measured for zero clearance. The paper discusses in some detail the physics of the flow and the reasons for the observed reduction in losses. The pressure difference across the gap was found to be considerably attenuated at the largest clearance. This would have the effect of reducing the mass flow rate per unit area through the gap as well as the kinetic energy of the gap flow. These effects appear to account for a large part of the reduction in losses. As might be expected, the turning of the flow near the endwall was considerably reduced at the large clearances.Keywords
This publication has 8 references indexed in Scilit:
- Interaction Between Inlet Boundary Layer, Tip-Leakage and Secondary Flows in a Low-Speed Turbine Cascade1994
- The Flow in a Second Stage Nozzle of a Low Speed Axial Turbine and its Effect on Tip Clearance Loss Development1994
- Measurement and Prediction of Tip Clearance Flow in Linear Turbine CascadesJournal of Turbomachinery, 1993
- Effects of Simulated Rotation on Tip Leakage in a Planar Cascade of Turbine Blades: Part II—Downstream Flow Field and Blade LoadingJournal of Turbomachinery, 1992
- Effects of Simulated Rotation on Tip Leakage in a Planar Cascade of Turbine Blades: Part I—Tip Gap FlowJournal of Turbomachinery, 1992
- Prediction of Tip-Leakage Losses in Axial TurbinesJournal of Turbomachinery, 1992
- Engine Performance Monitoring and Troubleshooting Techniques for the CF-18 AircraftJournal of Engineering for Gas Turbines and Power, 1991
- Tip Leakage Flow in a Linear Turbine CascadeJournal of Turbomachinery, 1988