Advantages of External Reflection and Transflection over ATR in the Rapid Material Characterization of Negatives and Films via FTIR Spectroscopy
Open Access
Abstract
The identification of film support material is of utmost importance for evidence-based collection management in cultural heritage institutions, especially the identification of cellulose nitrate for fire safety reasons, as nitrate is highly flammable and deteriorates over time. Cellulose nitrate film was used by photographers and movie filmmakers from its release in the 1880s to the 1950s. Cellulose acetate, being called safety film, gradually began to replace cellulose nitrate, as it is not flammable. Despite its non-flammable properties, cellulose acetate also deteriorates in hazardous ways. Therefore, identification of cellulose nitrate and cellulose acetate in collections is imperative for preservation and risk management to collections and humans. Large photographic collections can easily contain several thousand negatives or more, so a rapid, non-invasive and reliable method is needed. Traditional identification methods, such as destructive chemical tests, are sometimes unreliable, and spectroscopic analyses are normally time-consuming. To overcome these issues, rapid material characterization was performed in transflection mode with a Fourier-transform infrared (FTIR) spectrometer equipped with an external reflectance module and an additional aluminum-foil reflector. With this newly developed method, the support material (cellulose nitrate, cellulose acetate and polyester) of about 99.8% of all films can be determined within two seconds of measuring time, without any further spectral processing. Very distinctive spectral patterns are obtained with this new method, regardless of which side of the film is being analyzed. A simple visual inspection of the raw spectrum is usually sufficient to determine the film support identity. A detailed comparison of the various FTIR techniques shows the advantages of the transflection measurement for the material characterization of film support layers. This newly developed method enables the non-invasive, rapid and unambiguous material identification of even large film collections in a short time.Keywords
This publication has 27 references indexed in Scilit:
- Line shape distortion effects in infrared spectroscopyThe Analyst, 2012
- Characterisation of historic plastics using terahertz time-domain spectroscopy and pulsed imagingAnalytical and Bioanalytical Chemistry, 2012
- Quantitative NIR Chemical Imaging in Heritage ScienceAnalytical Chemistry, 2011
- Infrared reststrahlen revisited: commonly disregarded optical details related to n<1Analytical and Bioanalytical Chemistry, 2005
- A REVIEW OF FT-IR DIFFUSE REFLECTION SAMPLING CONSIDERATIONSApplied Spectroscopy Reviews, 2002
- Mid-Infrared Fiber-Optics Reflectance Spectroscopy: A Noninvasive Technique for Remote Analysis of Painted Layers. Part I: Technical SetupApplied Spectroscopy, 2001
- Mid-Infrared Fiber-Optics Reflectance Spectroscopy: A Noninvasive Technique for Remote Analysis of Painted Layers. Part II: Statistical Analysis of SpectraApplied Spectroscopy, 2001
- Specular reflectance: A convenient tool for polymer characterization by FTIR-microscopy?Micron, 1996
- Paint sample presentation for Fourier transform infrared microscopyVibrational Spectroscopy, 1992
- Effect of Scattering Coefficient on Diffuse Reflectance Infrared SpectraApplied Spectroscopy, 1990