Integrating expanders into heat exchanger networks above ambient temperature
- 23 July 2015
- journal article
- process systems-engineering
- Published by Wiley in AIChE Journal
- Vol. 61 (10) , 3404-3422
Abstract
The integration of expanders into heat exchanger networks (HENs) is a complex task since both heat and work are involved. In addition, the role of streams (as hot or cold), the utility demand, and the location of pinch points may change. With certain well‐defined conditions, four theorems are proposed for the integration of expanders into HENs above ambient temperature with the objective of minimizing exergy consumption. A straightforward graphical methodology for above ambient HENs design including expanders is developed on the basis of Grand Composite Curves (GCCs). It is concluded that to achieve a design with minimum exergy consumption, stream splitting may be applied and expansion should be done at pinch temperatures, hot utility temperature, or ambient temperature. In the majority of cases, however, and in line with the concept of Appropriate Placement from Pinch Analysis, expansion at pinch temperatures gives the minimum exergy consumption. © 2015 American Institute of Chemical Engineers AIChE J, 61: 3404–3422, 2015Keywords
Funding Information
- BIGCCS centre
- Norwegian research program Centres for Environment-friendly Energy Research (FME)
- GASSCO
- Shell
- Statoil
- Total
- GDF Suez
- Research Council of Norway (193816/S60)
This publication has 16 references indexed in Scilit:
- Simultaneous synthesis of heat exchanger networks with pressure recovery: Optimal integration between heat and workAIChE Journal, 2013
- Recuperative vapor recompression heat pumps in cryogenic air separation processesEnergy, 2013
- Synthesis of heat exchanger networks at subambient conditions with compression and expansion of process streamsAIChE Journal, 2010
- An Extended Pinch Analysis and Design procedure utilizing pressure based exergy for subambient coolingApplied Thermal Engineering, 2007
- A Critical Review and Annotated Bibliography for Heat Exchanger Network Synthesis in the 20th CenturyIndustrial & Engineering Chemistry Research, 2002
- The synthesis of cost optimal heat exchanger networksComputers & Chemical Engineering, 1988
- Heat integration of reactors—I. Criteria for the placement of reactors into process flowsheetChemical Engineering Science, 1988
- Heat and power networks in process design. Part I: Criteria for placement of heat engines and heat pumps in process networksAIChE Journal, 1983
- The pinch design method for heat exchanger networksChemical Engineering Science, 1983
- Heat integration of distillation columns into overall processesChemical Engineering Science, 1983