Spray Structure and Characteristics of a Pressure-Swirl Dust Suppression Nozzle Using a Phase Doppler Particle Analyze
Open Access
Abstract
In order to understand the characteristics of the spray field of a dust suppression nozzle and provide a reference for dust nozzle selection according to dust characteristics, a three-dimensional phase Doppler particle analyzer (PDPA) spray measurement system is used to analyze the droplet size and velocity characteristics in a spray field, particularly the joint particle size–velocity distribution. According to the results, after the ejection of the jet from the nozzle, the droplets initially maintained some velocity; however, the distribution of particles with different sizes was not uniform. As the spray distance increased, the droplet velocity decreased significantly, and the particle size distribution changed very little. As the distance increased further, the large droplets separated into smaller droplets, and their velocity decreased rapidly. The distributions of the particle size and velocity of the droplets then became stable. Based on the particle size-velocity distribution characteristics, the spray structure of pressure-swirl nozzles can be divided into five regions, i.e., the mixing, expansion, stabilization, decay, and rarefied regions. The expansion, stabilization, and decay regions are the effective dust fall areas. In addition, the droplet size in the stabilization region is the most uniform, indicating that this region is the best dust fall region. The conclusions can provide abundant calibration data for spray dust fall nozzles.Keywords
Funding Information
- Natural Science Foundation of Shandong Province (ZR2019BEE067)
- National Key Research and Development Plan (2016YFC0801700, 2017YFC0805200)
This publication has 31 references indexed in Scilit:
- The influence of forced ventilation airflow on water spray for dust suppression on heading face in underground coal minePowder Technology, 2017
- Effects of Spray Surfactant and Particle Charge on Respirable Coal Dust CaptureSafety and Health at Work, 2017
- Water-spray systems reducing negative effects of fine-dispersion dust at operator’s workplaces of machine-building industriesProcedia Engineering, 2017
- An experimental study of droplet-particle collisionsPowder Technology, 2016
- Experimental study on advantages of foam–sol in coal dust controlProcess Safety and Environmental Protection, 2014
- Dust dispersion and management in underground mining facesInternational Journal of Mining Science and Technology, 2014
- Dust particle removal efficiency of a venturi scrubberAnnals of Nuclear Energy, 2013
- Use of Air-and-Water Spraying Systems for Improving Dust Control in MinesJournal of Sustainable Mining, 2013
- Deterministic model of open-space dust removal system using water spray nozzle: Effects of polydispersity of water droplet and dust particleSeparation and Purification Technology, 2011
- Collection of Airborne Dust by Water SpraysIndustrial & Engineering Chemistry Process Design and Development, 1973