Multi-objective optimisation of friction welding parameters in joining titanium alloy and stainless steel with a novel interlayer geometry
- 7 November 2019
- journal article
- research article
- Published by Taylor & Francis in Advances in Materials and Processing Technologies
- Vol. 6 (1) , 25-39
Abstract
The main purpose of the present research work was to identify and investigate a novel method of holding the intermediate metal and to evaluate the metallurgical and mechanical properties of dissimilar Ti-6Al-4V and 304L stainless steel with copper as an interlayer material.. The study shows that the input parameters and surface geometry played a very significant role in producing a good quality joint with minimum heat- affected zone and metal loss. Based on the literature and experiments conducted in this investigation, sound weld was achieved between Ti-6Al-4V and SS304L, by using copper rod as an intermediate metal. In the present study, Ti-6Al-4V alloy and SS304L were joined by a novel method of holding the interlayer and new surface geometry for the interlayer. A minimum number of experiments required to perform the experimentation were decided to use Taguchi orthogonal array. The fabricated weld joint was analysed for quality initially by drop test and subsequently using non-destructive techniques like radiography and cross section scan (C-scan). Multi objective optimisation using grey relational analysis was done to understand the levels of process parameters at which the performance of the joint is better. Further, optical micrograph was done to substantiate the results of hardness and tensile strength.Keywords
This publication has 15 references indexed in Scilit:
- Experimental evaluation of mechanical properties of friction welded AISI steelsCogent Engineering, 2014
- Multi objective optimization of performance parameters of a single cylinder diesel engine running with hydrogen using a Taguchi-fuzzy based approachEnergy, 2013
- Investigation on Joining of Aluminum and Mild Steel by Friction Stud WeldingMaterials and Manufacturing Processes, 2012
- Role of nickel as an interlayer in dissimilar metal friction welding of maraging steel to low alloy steelJournal of Materials Processing Technology, 2012
- Friction Welding of Titanium to 304L Stainless Steel Using InterlayersPractical Metallography, 2011
- Effect of Friction Welding Condition and Weld Faying Surface Properties on Tensile Strength of Friction Welded Joint between Pure Titanium and Pure CopperJournal of Solid Mechanics and Materials Engineering, 2011
- Strength distribution at interface of rotary-friction-welded aluminum to nodular cast ironTransactions of Nonferrous Metals Society of China, 2008
- Effects of copper insert layer on the properties of friction welded joints between TiAl and AISI 4140 structural steelIntermetallics, 2004
- Effect of Microstructure on Mechanical Properties of Friction-Welded Joints between Ti and AISI 321 Stainless SteelMATERIALS TRANSACTIONS, 2004
- Influence of Ni Interlayers on the Mechanical Properties of Ti6Al4V/(WC-Co) Friction WeldsMaterials and Manufacturing Processes, 2003