Y-TZP surface behavior under two different milling systems and three different accelerated aging protocols
- 1 November 2018
- journal article
- research article
- Published by Edizioni Minerva Medica in Minerva Dental and Oral Science
- Vol. 67 (6) , 237-245
Abstract
To evaluate the influence of aging and milling system on zirconia surface roughness (SR) and phase transformation. Eighty crowns were divided in two groups according to yttria-stabilized tetragonal zirconia polycrystalline (Y-TZP) ceramic milling system (CAD-Neodent or MAD-Zirkonzahn). The crowns were submitted to different aging protocols (N.=10): 1) no aging; 2) autoclaving; 3) pH cycling; or 4) thermocycling. Next, the samples were submitted to an optical profilometry analysis to determine differences in the SR (µm). An X-ray diffraction analysis (XRD) was performed to quantify the percentage of monoclinic phase transformation. SR data was analyzed by two-way ANOVA (α=0.5%). Aging protocol (P=0.42) and milling system (P=0.08) had no influence on the SR. However, the number of monoclinic phases was influenced by the autoclaving and pH cycling. The surface roughness of zirconia-based crowns was not influenced by low temperature degradation or milling system. Regarding the phase transformation, autoclaving and pH-cycling aging presented a monoclinic phase increase when compared to the control group and thermocycled groups.Keywords
This publication has 48 references indexed in Scilit:
- Monolithic Ceramics: Effect of Finishing Techniques on Surface Properties, Bacterial Adhesion and Cell ViabilityOperative Dentistry, 2018
- Clinical performance and failures of zirconia-based fixed partial dentures: a review literatureThe Journal of Advanced Prosthodontics, 2012
- Comparison of the marginal fit of different coping materials and designs produced by computer aided manufacturing systemsDental Materials Journal, 2011
- Phase transformation of zirconia ceramics by hydrothermal degradationDental Materials Journal, 2011
- State of the art of zirconia for dental applicationsDental Materials, 2008
- Performance of 3Y-TZP bioceramics under cyclic fatigue loadingMaterials Research, 2008
- Microtensile bond strength of different components of core veneered all-ceramic restorationsDental Materials, 2005
- Strength, fracture toughness and microstructure of a selection of all-ceramic materials. Part II. Zirconia-based dental ceramicsDental Materials, 2004
- Crack growth resistance of alumina, zirconia and zirconia toughened alumina ceramics for joint prosthesesBiomaterials, 2002
- Zirconia as a ceramic biomaterialBiomaterials, 1999