Split-Hopkinson Pressure Bar Testing of Unsaturated Sand
Authors:
- 1 December 1990
- journal article
- Published by ASTM International in Geotechnical Testing Journal
- Vol. 13 (4) , 291-300
Abstract
High amplitude, split-Hopkinson pressure bar (SHPB) laboratory tests were conducted on compacted specimens of 50/80 silica sand to evaluate the influence of saturation on compressional-stress wave velocity, stress transmission, and attenuation. Stress wave velocity and transmitted stress increase as the saturation increases from 0 to 30 to 40% for constant input stress and constant dry density. At saturation levels between 40 to 95%, both the wave speed and the transmitted stress decrease with increasing saturation. Quasistatic confined modulus show similar trends. These trends may be explained by capillary pressure.Keywords
This publication has 9 references indexed in Scilit:
- Dynamic High Stress Experiments on SoilGeotechnical Testing Journal, 1987
- Cone Penetration of Partially Saturated SandsGeotechnical Testing Journal, 1987
- Capillary Effects on Dynamic Modulus of Sands and SiltsJournal of Geotechnical Engineering, 1984
- Stress State Variables for Unsaturated SoilsJournal of the Geotechnical Engineering Division, 1977
- Split-hopkinson-bar tests on rock under confining pressureExperimental Mechanics, 1972
- Some Aspects of Effective Stress in Saturated and Partly Saturated SoilsGéotechnique, 1963
- An Investigation of the Mechanical Properties of Materials at very High Rates of LoadingProceedings of the Physical Society. Section B, 1949
- A critical study of the Hopkinson pressure barPhilosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences, 1948
- X. A method of measuring the pressure produced in the detonation of high, explosives or by the impact of bulletsPhilosophical Transactions of the Royal Society A, 1914