Finite Element Simulation and Performance Test of Loading and Mixing Characteristics of Self-Propelled Total Mixed Ration Mixer
Open Access
- 13 March 2020
- journal article
- research article
- Published by Wiley in Journal of Engineering
- Vol. 2020, 1-15
Abstract
Simulation analysis and parameter optimization are performed for the loading and mixing devices of a self-propelled total mixed ration mixer. To reveal the three-dimensional movement of silage material under the action of the loading cutter roller, the latter is modeled using SolidWorks software. ANSYS/LS-DYNA software is used to simulate the process of silage cutting, which is modeled using smoothed particle hydrodynamics coupled with the finite element method. The cutting force and power consumption are simulated, and the behavior of the equivalent strain of the silage is determined. The results showed that silage was broken up mainly by extrusion and shear force due to the loading cutter roller. The power consumption according to the simulation is consistent with the value from an empirical formula, confirming the validity of the proposed modeling method. To study the mixing performance and obtain the optimum parameters of the mixing device, the Hertz–Mindlin model is used for the interaction between material particles and mixing device. A three-factor, five-level method is used to optimize the mixing performance. Material-mixing time, loading rate, and auger speed are chosen as experimental factors and mixed uniformity as an evaluation index. It is found that auger speed and material mixing time have significant effects on mixing uniformity. These results provide reference values allowing the analysis of the crushing of silage and selection of the optimum parameters for mixing performance.Keywords
Funding Information
- Chinese National Key Research & Development Plan (2016YFD0701701, 2017GNC10123, 2016CYJS05A02)
- Shandong Province Key Technologies Research & Development Plan (2016YFD0701701, 2017GNC10123, 2016CYJS05A02)
- Shandong provincial key research and development plan (2016YFD0701701, 2017GNC10123, 2016CYJS05A02)
This publication has 26 references indexed in Scilit:
- Three-dimensional discrete element modelling of tillage: Determination of a suitable contact model and parameters for a cohesionless soilBiosystems Engineering, 2014
- Discrete element modelling of large scale particle systems—I: exact scaling lawsComputational Particle Mechanics, 2014
- DEM speedup: Stiffness effects on behavior of bulk materialParticuology, 2014
- On upscaling of discrete element models: similarity principlesEngineering Computations, 2009
- Calibration of discrete element parameters and the modelling of silo discharge and bucket fillingComputers and Electronics in Agriculture, 2009
- Assessing mixing characteristics of particle-mixing and granulation devicesParticuology, 2008
- Coupling of mesh-free methods with finite elements: basic concepts and test resultsCommunications in Numerical Methods in Engineering, 2006
- Continuous blending of SPH with finite elementsComputers & Structures, 2005
- DEM-based models for the mixing of granular materialsChemical Engineering Science, 2005
- SPH for high velocity impact computationsComputer Methods in Applied Mechanics and Engineering, 1996