Friction Damping of Hollow Airfoils: Part I—Theoretical Development
Authors:
- 1 January 1998
- journal article
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 120 (1) , 120-125
Abstract
The quest for higher performance engines in conjunction with the requirement for lower life cycle costs has resulted in stage configurations that are more susceptible to high cycle fatigue. One solution is the use of innovative approaches that introduce additional mechanical damping. The present paper describes an approach that may be used to assess the benefits of friction dampers located within internal cavities of a hollow structure. The friction dampers used in this application are often relatively thin devices that, if unconstrained, have natural frequencies in the same range as the natural frequencies of the hollow airfoil. Consequently, the analytical approach that is developed is distinct in that it has to take into account the dynamic response of the damper and how it changes as the amplitude of the vibration increases. In this paper, results from the analytical model are compared with independently generated results from a time integration solution of a three mass test problem. Results from the analytical model are compared with experimental data in a companion paper.Keywords
This publication has 13 references indexed in Scilit:
- Friction Damping of Hollow Airfoils: Part II—Experimental VerificationJournal of Engineering for Gas Turbines and Power, 1998
- Modeling of Friction Contact and Its Application to the Design of Shroud ContactJournal of Engineering for Gas Turbines and Power, 1997
- Resonant Response of a Tapered Beam and Its Implications to Blade VibrationJournal of Engineering for Gas Turbines and Power, 1997
- Friction damping of two-dimensional motion and its application in vibration controlJournal of Sound and Vibration, 1991
- An Integrated Approach for Friction Damper DesignJournal of Vibration and Acoustics, 1990
- A Review of Friction Damping of Turbine Blade VibrationInternational Journal of Turbo & Jet-Engines, 1990
- The influence of microslip on vibratory response, Part II: A comparison with experimental resultsJournal of Sound and Vibration, 1986
- The influence of microslip on vibratory response, part I: A new microslip modelJournal of Sound and Vibration, 1986
- A Comparison of Transient and Steady State Finite Element Analyses of the Forced Response of a Frictionally Damped BeamJournal of Vibration and Acoustics, 1985
- Friction Damping of Resonant Stresses in Gas Turbine Engine AirfoilsJournal of Engineering for Power, 1980