Design and testing of high‐density polyethylene nanocomposites filled with lead oxide micro‐ and nano‐particles: Mechanical, thermal, and morphological properties
- 9 April 2019
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 136 (31)
Abstract
This research discusses the mechanical behavior and the microstructure of high‐density polyethylene (HDPE)‐based composites, manufactured using the melt‐mixing and thermal‐pressing techniques, where HDPE is mixed with various percentages of either bulk lead monoxide (bulk PbO) or PbO nanoparticles (PbO‐NPs) acting as fillers. The scanning electron microscope and the field emission transmission electron microscope were utilized to identify the morphology of polymeric composites. Both showed the proper dispersion of PbO in the HDPE matrix without substantial agglomerations. The effect of PbO on the thermal behavior of the HDPE was studied using the thermogravimetric analysis. Tensile tests were implemented to find out how the mechanical characteristics of the composites were affected. Yield stress, % elongation at break, stiffness, tensile energy (toughness), ultimate tensile strength, and ultimate tensile strain were elucidated in this work. The values of stiffness, ultimate tensile strength, and yield stress increased by increasing either the bulk PbO or PbO‐NPs' loading up to 40.0 wt % with reference to the hosting matrix. The values of ultimate tensile strain, tensile energy, and % elongation at break of the assembled composites diminished dramatically by increasing the filler's content from 10.0 to 50.0 wt %. Besides, composites with PbO‐NPs as a filler were identified as having higher mechanical characteristics than those with bulk PbO for the same wt %. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci.2019,136, 47812.Keywords
This publication has 37 references indexed in Scilit:
- Radiation-protective polymer-matrix nanostructured compositesJournal of Alloys and Compounds, 2012
- Mechanical and thermal characteristics of high density polyethylene–fly ash Cenospheres compositesMaterials & Design (1980-2015), 2010
- Nanoscale particles for polymer degradation and stabilization—Trends and future perspectivesProgress in Polymer Science, 2009
- Thermal degradation mechanism of HDPE nanocomposites containing fumed silica nanoparticlesThermochimica Acta, 2009
- Structural and mechanical properties of polymer nanocompositesMaterials Science and Engineering: R: Reports, 2006
- Study of the tetragonal-to-cubic phase transition in PbTiO3nanopowdersJournal of Physics: Condensed Matter, 2006
- Rheological characterization of polystyrene–clay nanocomposites to compare the degree of exfoliation and dispersionPolymer, 2005
- Filler toughening of plastics. Part 1—The effect of surface interactions on physico-mechanical properties and rheological behaviour of ultrafine CaCO3/HDPE nanocompositesPolymer, 2005
- Multi‐frequency EPR studyof Cr3+ doped lead titanate (PbTiO3) nanopowdersPhysica Status Solidi (b), 2003
- Preparation of Nanocrystalline BaTiO3 Characterized by in Situ X-ray Absorption SpectroscopyThe Journal of Physical Chemistry B, 2001