Surface interactions and tribochemistry in boundary lubrication of hypereutectic aluminium—silicon alloys
- 16 January 2009
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
- Vol. 223 (3) , 593-601
Abstract
The tribofilms formed on a hypereutectic Al—Si alloy after sliding against AISI 52100 steel pins in a reciprocating pin-on-plate tribometer with polyalpha olefin (PAO) base oil containing zinc dialkyldithiophosphate (ZDDP) and molybdenum dithiocarbamate (MoDTC) additives have been studied. Surface-sensitive analytical techniques (X-ray photoelectron spectroscopy (XPS), secondary ion mass spectroscopy (SIMS), atomic force microscopy (AFM), Raman spectroscopy, and nanoindentation) have been used for tribofilm chemical and mechanical characterization. The thickness of the tribofilms has been evaluated using depth profiling and focus ion beam (FIB) milling. This is the only reported work to analyse this kind of tribofilm on Al—Si alloys in this detail. From the analysis obtained from miniSIMS, differences in the composition of the top layer of the tribofilms formed from ZDDP and ZDDP+MoDTC lubricants have been observed. When using only ZDDP, this top layer is rich in Zn and Fe; with the addition of MoDTC the top layer contains phosphates, probably from the decomposition of the ZDDP, and MoS2. The effect of adding MoDTC can also be observed in the overall tribofilm thickness and coverage of the samples.Keywords
This publication has 16 references indexed in Scilit:
- Origins of the wear resistance of AlSi cylinder bore surfaces studies by surface analytical toolsTribology International, 2007
- Understanding the composition and low friction tribofilm formation/removal in boundary lubricationTribology International, 2007
- A multi-technique characterization of ZDDP antiwear films formed on Al (Si) alloy (A383) under various conditionsTribology Letters, 2007
- ZDDP and MoDTC interactions in boundary lubrication—The effect of temperature and ZDDP/MoDTC ratioTribology International, 2006
- ZDDP and MoDTC interactions and their effect on tribological performance – tribofilm characteristics and its evolutionTribology Letters, 2006
- Development of a ToF version of the desktop MiniSIMS utilising a continuous primary ion beamApplied Surface Science, 2006
- Chemical characterization and nanomechanical properties of antiwear films fabricated from ZDDP on a near hypereutectic Al–Si alloyTribology Letters, 2005
- Spatially resolved nanoscale chemical and mechanical characterization of ZDDP antiwear films on aluminum?silicon alloys under cylinder/bore wear conditionsTribology Letters, 2005
- X-ray absorption spectroscopy of tribofilms produced from zinc dialkyl dithiophosphates on Al–Si alloysWear, 2004
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsJournal of Materials Research, 1992