Comparative study of PWB pad cratering subject to reflow soldering and thermal impact
Authors:
- 1 January 2010
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 05695503,p. 464-470
Abstract
Pad cratering is one of the dominant failure modes that occur in various board level reliability tests, especially under the dynamic loading. In recent years, the increasing propensity of pad cratering due to the implementation of the lead-free technology calls for the necessity of re-assessment of PWB qualification related to the pad cratering resistance. The objective of the present study is to establish a test method for evaluating the pad cratering resistance of PWB and studying the PWB degradation mechanism subject to different high temperature conditions. Three kinds of PWB with different resin systems were investigated, including one phenolic-cured system board and two dicy-cured system boards. Tg and Td of the selected PWBs were characterized using TMA and TGA. The detailed cold ball pull test procedure is presented and different pull jaws with/without standoff are evaluated in this paper. The effects of multiple reflows, thermal aging and temperature cycling on the pad cratering resistance of PWBs are discussed as well.Keywords
This publication has 5 references indexed in Scilit:
- Assessment of PCB pad cratering resistance by joint level testing2008
- Board Design Influence on BGA Mechanical Reliability2007
- Investigation of IMC Thickness Effect on the Lead-free Solder Ball Attachment Strength: Comparison between Ball Shear Test and Cold Bump Pull Test Results2006
- Drop Test Reliability Improvement of Lead-free Fine Pitch BGA Using Different Solder Ball Composition2006
- BGA brittle fracture - alternative solder joint integrity test methods2005