Microstructure, wear and corrosion characteristics of Cu matrix reinforced SiC–graphite hybrid composites
- 26 February 2019
- journal article
- research article
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 53 (18) , 2545-2553
Abstract
The aim of the present study is to investigate the effect of SiC-graphite reinforcement on the properties of pure copper. Copper matrix composites with SiC-graphite reinforcement (0, 2.5,5, 7.5 and 10 wt.%) were prepared by stir casting process. Microstructure, phase, density, hardness and wear rate of prepared samples have been investigated. X-ray diffraction revealed that there is no intermediate phase formation between the reinforcement and matrix as a result of interfacial bonding between them. Microstructure study shows the uniform distribution of SiC-graphite particles in the Cu-matrix. Mechanical and corrosion properties of these Cu matrix MMCs were found to be dependent on the reinforcement content. Hardness was found to decrease with the addition of graphite due to its soft nature. Composite containing 5 wt.% reinforcement has shown minimum wear rate and maximum corrosion resistance. It is expected that the present composite will be useful for thermal management applications especially in heat exchangers.Keywords
Funding Information
- Qatar National Research Fund (UREP grant # UREP23-116-2-041)
This publication has 23 references indexed in Scilit:
- Effect of sintering on wear characteristics of Fe-Al2O3 metal matrix compositesProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2013
- Structural and mechanical behaviour of 5% Al2O3-reinforced Fe metal matrix composites (MMCs) produced by powder metallurgy (P/M) routeBulletin of Materials Science, 2013
- Synthesis and characterization of Fe–ZrO2 metal matrix compositesJournal of Composite Materials, 2013
- Tribological performance of microwave sintered copper–TiC–graphite hybrid compositesTribology International, 2011
- The fibre/matrix interface and its influence on mechanical and physical properties of Cu-MMCComposites Science and Technology, 2010
- Tribological properties of solid lubricants (graphite, h-BN) for Cu-based P/M friction compositesTribology International, 2008
- The role of graphite particles in the high-temperature wear of copper hybrid composites against steelMaterials & Design (1980-2015), 2006
- Friction and Wear Behavior of Copper Matrix Composites Reinforced with SiC and Graphite ParticlesTribology Letters, 2004
- The effect of interfacial modifying on the mechanical and wear properties of SiCp/Cu compositesMaterials Letters, 2003
- Particulate reinforced metal matrix composites — a reviewJournal of Materials Science, 1991