Microstructural and mechanical characterisation of WC–Co alloys elaborated by liquid phase sintering and hot isostatic pressing: study of WC crystallites size evolution
Authors:
- 25 April 2022
- journal article
- research article
- Published by Taylor & Francis in Canadian Metallurgical Quarterly
- Vol. 62 (1) , 27-35
Abstract
This work aims at the characterisation and study of WC tungsten carbide crystallites size evolution as well as of the microstructure of WC–Co alloys produced by liquid phase sintering and by hot isostatic pressing (HIP). The goal of this study is to demonstrate a possible improvement in mechanical and surface properties by using hot isostatic pressing (HIP) compared to liquid phase sintering. Two types of cemented carbides containing 11 and 20 wt-% of cobalt have been produced by two different techniques. The alloys microstructures were characterised by scanning electron microscopy (SEM). The size evolution and dimensions of WC crystallites were derived from Wagner-Halder and Williamson-Hall methods following the exploitation of X-ray diffraction line profiles. Vickers micro-hardness tests were also performed in this study. It is found that there is a clear improvement in micro-hardness for materials densified by hot isostatic pressing (HIP).Keywords
This publication has 10 references indexed in Scilit:
- Characterization and Microstructural Evolution of WC-Co Cemented CarbidesAnnales de Chimie - Science des Matériaux, 2021
- Comparative Study by Image Analysis of WC-Co Alloys Elaborated by Liquid Phase Sintering and Hot Isostatic PressingAnnales de Chimie - Science des Matériaux, 2020
- Caractérisation d’un carbure cémenté contenant 11% en masse de cobalt élaboré par compression isostatique à chaud : Etude de la réactivité de la gaine en acier avec le composant WCAnnales de Chimie - Science des Matériaux, 2016
- Study on the sintered characteristics and properties of nanostructured WC–15 wt% (Fe–Ni–Co) and WC–15 wt% Co hard metal alloysJournal of Alloys and Compounds, 2015
- Etude comparée des propriétés de carbures cémentés élaborés par frittage et compression isostatique à chaudAnnales de Chimie - Science des Matériaux, 2007
- Évolution de la morphologie des pores durant la compression isostatique à chaud de poudres sphériquesMatériaux & Techniques, 1999
- The formation of ternary compound Fe3Mo3C by ball millingJournal of Applied Physics, 1995
- The mechanism of mechanical alloyingMetallurgical Transactions, 1974
- Strain and particle size values from X-ray line breadthsActa Crystallographica, 1965
- X-ray line broadening from filed aluminium and wolframActa Metallurgica, 1953