Influence of Strain Rate, Temperature, Plastic Strain, and Microstructure on the Strain Rate Sensitivity of Automotive Sheet Steels
Authors:
- 5 November 2012
- journal article
- research article
- Published by Wiley in Steel Research International
- Vol. 84 (5) , 426-442
Abstract
This work identifies the influence of strain rate, temperature, plastic strain, and microstructure on the strain rate sensitivity of automotive sheet steel grades in crash conditions. The strain rate sensitivity m has been determined by means of dynamic tensile tests in the strain rate range 10−3–200 s−1 and in the temperature range 233–373 K. The dynamic flow curves have been tested by means of servohydraulic tensile testing. The strain rate sensitivity decreases with increasing plastic strain due to a gradual exhausting of work hardening potential combined with adiabatic softening effects. The strain rate sensitivity is improved with decreasing temperature and increasing strain rate, according to the thermally activated deformation mechanism. The m‐value is reduced with increasing strength level, this decrease being most pronounced for steels with a yield strength below 400 MPa. Solid solution alloying with manganese, silicon, and especially phosphorous elements lowers the strain rate sensitivity significantly. Second phase hardening with bainite and martensite as the second constituent in a ferritic matrix reduces the strain rate sensitivity of automotive sheet steels. A statistical modeling is proposed to correlate the m‐value with the corresponding quasistatic tensile flow stress.Keywords
This publication has 24 references indexed in Scilit:
- Influence of Pre‐Straining and Bake Hardening on the Strain Rate Sensitivity of Automotive Sheet SteelsSteel Research International, 2011
- Constitutive relations in 3-D for a wide range of strain rates and temperatures – Application to mild steelsInternational Journal of Solids and Structures, 2007
- Effects of Strain Rate and Identification of Material Constants for Three Automotive SteelsSteel Research International, 2007
- Dual phase versus TRIP strip steels: Comparison of dynamic properties for automotive crash performanceMaterials Science and Technology, 2007
- Microstructure and dynamic material performance of high strength and ultra high strength strip steelsMaterials Science and Technology, 2007
- Solid solution softening at high strain rates in Si- and/or Mn-added interstitial free steelsActa Materialia, 2003
- Determination of crash‐relevant material parameters by dynamic tensile testsSteel Research, 2000
- Influence of alloying elements on the strain rate and temperature dependence of the flow stress of steelsMetallurgical and Materials Transactions A, 2000
- Some surprising features of the plastic deformation of body-centered cubic metals and alloysMetallurgical Transactions A, 1983
- The temperature and strain-rate dependence of the shear strength of mild steelPhilosophical Magazine, 1970