Supportless 5-Axis 3D-Printing and Conformal Slicing: A Simulation-based Approach
- 17 April 2023
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
Abstract
In the conventional three-dimensional (3D) printing, the parts are generated layer-by-layer along the z-axis by depositing the material. This approach simplifies the fabrication process, kinematics, and mechanical design of the 3D printers. However, the printed parts have non-uniform structural strength, planar visible layers, more travelling time, creates seam and support structures, etc. At the same time, this approach leads to the additional material and processing time. To overcome these issues, researcher focuses on the development of multi axis computer numerical control (CNC) and more than 6 degree of freedom (DOF) industrial manipulators as 3D-printers. However, such multi axis 3D-printing is still inaccessible for industrial use because of non-availability of fully developed slicing software. To make multi axis 3Dprinting more accessible, in this paper, we present a novel 5-axis conformal slicing algorithm for 3D-printing. The 5-axismaker machine is used to demonstrate 3D-printing of non-linear objects using iso-curves. Initially, the forward kinematics of the machine are computed using Denavit–Hartenberg (DH) parameter method, and motor variables are computed using inverse kinematics approach. Later, interface for conformal slicer is developed with the help of Rhino3D and Grasshopper software to generate the G-Code. The developed slicer allows the full control of printing path and parameters. Finally, the tubes (loft) are designed and printed with 3-axis and 5-axis methods to demonstrate the feasibility of algorithms. The ANSYS simulations are conducted for static study to check the structural strength of the parts. The simulations are validated by conducting experiments for compression test using Zwick Roell Z020. The results from both simulations and experiments are in good agreement, with a deviation of only 3.41%.Keywords
This publication has 23 references indexed in Scilit:
- 3D printing for soft robotics – a reviewScience and Technology of Advanced Materials, 2018
- 3D printing trends in building and construction industry: a reviewVirtual and Physical Prototyping, 2017
- Optically Clear and Resilient Free-Form µ-Optics 3D-Printed via Ultrafast Laser LithographyMaterials, 2017
- Adoption of 3D-printing technologies in manufacturing: A survey analysisInternational Journal of Production Economics, 2017
- Modelling curved-layered printing paths for fabricating large-scale construction componentsAdditive Manufacturing, 2016
- Additively-manufactured metallic micro-lattice materials for high specific energy absorption under static and dynamic loadingActa Materialia, 2016
- Large-Scale Deposition System by an Industrial Robot (I): Design of Fused Pellet Modeling System and Extrusion Process Analysis3D Printing and Additive Manufacturing, 2016
- 3D printing in aerospace and its long-term sustainabilityVirtual and Physical Prototyping, 2015
- Automated Slicing for a Multiaxis Metal Deposition SystemJournal of Manufacturing Science and Engineering, 2006
- Directed light fabrication of a solid metal hemisphere using 5-axis powder depositionJournal of Materials Processing Technology, 1998