Low-Temperature Binder Specification Development: Thermal Stress Restrained Specimen Testing of Asphalt Binders and Mixtures
Authors:
- 1 January 2001
- journal article
- research article
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
- Vol. 1766 (1) , 7-14
Abstract
Results of low-temperature testing of Bow River asphalt binders and concrete mixtures, unmodified and modified with three commercially used polymers [diblock styrene-butadiene (SB), radial styrene-butadiene-styrene (SBS), and ethylene-vinyl acetate], are discussed. Thermal stress-restrained specimen tests, at a cooling rate of 10°C/h, were used to evaluate the performance of binders and mixtures. Binders were restrained as direct tension specimens with and without a sharp starter crack. Notching of the samples resulted in lower failure loads for all systems. But three of the four binders failed at warmer temperatures. The fourth binder, an exceptionally tough radial SBS-modified system, remained unaffected in this regard. Changes in failure temperatures ranged from 0°C (radial SBS) to +12°C (diblock SB). A comparison of binder results with those obtained for the mixture yields additional insights. It appears that there are differences between binder and mixture failure modes. The higher stress levels encountered in the mixture give rise to energy dissipating mechanisms that do not occur at the lower stress levels in the binder test. It is unlikely that a specification based on binder failure stress or strain will predict performance in polymer-modified systems. Three-point bend tests on notched asphalt binder or mastic beams may provide more realistic conditions for measuring materials properties. A compression test on the binder or mastic may be used to determine additional important parameters, such as Young’s modulus and yield stress in compression, which along with the failure properties, will likely produce an improved fracture mechanics-based low-temperature failure criterion.Keywords
This publication has 9 references indexed in Scilit:
- Low-Temperature Fracture Testing of Asphalt Binders: Regular and Modified SystemsTransportation Research Record: Journal of the Transportation Research Board, 2000
- New Class of Reactive Polymer Modifiers for Asphalt: Mitigation of Low-Temperature DamageTransportation Research Record: Journal of the Transportation Research Board, 2000
- Effect of particle morphology on the emulsion stability and mechanical performance of polyolefin modified asphaltsPolymer Engineering & Science, 1998
- Low-temperature cracking of polymer-modified asphaltMaterials and Structures, 1998
- Low-Temperature Cracking and Aging Performance of Modified Asphalt Concrete SpecimensTransportation Research Record: Journal of the Transportation Research Board, 1998
- Fracture Morphology and Fracture Toughness Measurement of Polymer-Modified Asphalt ConcreteTransportation Research Record: Journal of the Transportation Research Board, 1997
- Microstructure, Morphology, and Failure Modes of Polymer-Modified AsphaltsTransportation Research Record: Journal of the Transportation Research Board, 1996
- Relationship between mechanical properties of and crack progogation in epoxy resin adhesivesPolymer, 1978
- Failure of brittle polymers by slow crack growthJournal of Materials Science, 1977