Large format cylindrical lens films formed by roll–to–roll ultraviolet embossing and applications as diffusion films
Authors:
- 18 February 2015
- journal article
- Published by IOP Publishing in Journal of Micromechanics and Microengineering
- Vol. 25 (3)
Abstract
A roll–to–roll (R2R) ultraviolet (UV) embossing system has been developed for manufacturing micro features on continuous flexible films. The R2R UV embossing system, which has an embossing roller of 160 mm in diameter, can handle flexible polymer films with a width up to 500 mm and thickness ranging from 0.05 to 0.5 mm. A metal sheet template with micro features on its surface is mounted to the embossing roller and used as embossing mould. A slot die coating unit that has a coating width of 250 mm is used to deposit liquid UV curable resin on polymer films and coating thickness ranging from 10 to 50 µ m has been achieved. Continuous roll–to–roll UV embossing is conducted and optical films with cylindrical lens arrays (curvature radius = 112 ± 2 µ m, sag height = 28 ± 0.5 µ m and pitch = 150 ± 2 µ m) are formed. The optical films are used for diffusion to improve light uniformity of a printed lighting film that consists of lighting stripes and dark blank lines. The evaluation results show that the non-uniformity of light intensity can be reduced from 30% (with only lighting panel) to about 3% with the cylindrical lens films.Keywords
This publication has 16 references indexed in Scilit:
- Micro hot embossing of thermoplastic polymers: a reviewJournal of Micromechanics and Microengineering, 2013
- High-density pattern transfer via roll-to-roll ultraviolet nanoimprint lithography using replica moldJournal of Vacuum Science & Technology B, 2012
- Roll-to-roll pilot nanoimprinting process for backlight devicesMicroelectronic Engineering, 2012
- Recent developments and design challenges in continuous roller micro- and nanoimprintingJournal of Vacuum Science & Technology B, 2011
- Roll-to-roll UV imprint lithography for flexible electronicsMicroelectronic Engineering, 2011
- Microstructural fabrication and design of sunlight guide panels of inorganic–organic hybrid materialEnergy and Buildings, 2011
- Large-Area Roll-to-Roll and Roll-to-Plate Nanoimprint Lithography: A Step toward High-Throughput Application of Continuous NanoimprintingACS Nano, 2009
- Replication of Microstructures by Roll-to-Roll UV-Curing EmbossingPolymer-Plastics Technology and Engineering, 2008
- Nanoimprint lithography: An old story in modern times? A reviewJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 2008
- Fabrication of large area resin microlens arrays using gas-assisted ultraviolet embossingOptics Express, 2008