SHRINKAGE AND DENSITY VARIATIONS OF FRESH GREEN BEANS DURING DRYING IN AN INERT MEDIUM FLUIDIZED BED
Authors:
Open Access
- 1 June 2008
- journal article
- Published by Wiley in Journal of Food Quality
- Vol. 31 (3) , 323-346
Abstract
In this article, the shrinkage and density variations of cylindrical fresh green beans were investigated in a fluidized bed dryer with energy carriers. A pilot‐scaled fluidized bed dryer was set up for performing the drying experiments. Glass bead particles were used as inert materials. The drying experiments were done with fresh green beans of several lengths using hot air as a heating agent with the temperature range of 30–50C, and the effects of various parameters, such as the presence of inert materials, temperature and sample length, were investigated. It was found that the shrinkage or volume changes, and radial and axial contractions of fresh green beans could be well correlated as linear functions of moisture content during drying. Calculated and experimental values were in good agreement with mean absolute errors (MAEs) of 3.56, 2.48 and 1.22 for volume changes, and axial and radial contractions, respectively. By considering that the change in the volume of the samples was equal to the volume of evaporated water, mathematical models were proposed for volume and density variations. Comparison of the predicted values for volume and density by the proposed model with experimental date showed that the uniform model of shrinkage could explain the shrinkage and density variations of fresh green beans with MAEs of 5.190 and 4.250 for volume and density variations, respectively. The shrinkage coefficients were evaluated by considering their measurement uncertainties.PRACTICAL APPLICATIONS: Any attempt to characterize drying behavior must inevitably address the physical parameters of the material such as shrinkage and density. The shrinkage phenomenon occurring during the drying process affects the physical properties of the solids, as well as the transport phenomena properties. The shrinkage of vegetables during drying is important not only from the viewpoint of material end use but also for simulation problems.Keywords
This publication has 21 references indexed in Scilit:
- Environmental Benign Design of DMC Production ProcessChemical Engineering Research and Design, 2006
- Correlations for shrinkage, density and diffusivity for drying of maize and green peas in a fluidized bed with energy carrierJournal of Food Engineering, 2003
- Experimental and Theoretical Investigation of Drying of Carrots in a Fluidized Bed with Energy CarrierDrying Technology, 2003
- Shrinkage of carrots during drying in an inert medium fluidized bedJournal of Food Engineering, 2002
- Analytical solution of mass transfer equation considering shrinkage for modeling food-drying kineticsJournal of Food Engineering, 2000
- Moisture transport in shrinking gels during saturated dryingAIChE Journal, 1997
- OSMO-CONVECTIVE DRYING OF GRAPESDrying Technology, 1994
- Thin-layer drying of melon seedJournal of Food Engineering, 1989
- Simultaneous heat and mass transfer between a fluidized bed of fine particles and immersed coarse porous particlesInternational Journal of Heat and Mass Transfer, 1987
- Model for Oxidative Thermal Decomposition of Starch in a Fluidized ReactorIndustrial & Engineering Chemistry Process Design and Development, 1970