Mechanical Model for Non Ductile Reinforced Concrete Columns
- 25 March 2013
- journal article
- research article
- Published by Taylor & Francis in Journal of Earthquake Engineering
- Vol. 17 (7) , 937-957
Abstract
Column failure is the primary cause of collapse during earthquakes for many existing reinforced concrete buildings. The main objective of this article is to develop a macro model to reproduce the lateral load–deformation response of reinforced concrete columns with limited ductility due to degradation of shear resistance. This model will eventually be used to perform probabilistic assessments of collapse risk for existing reinforced concrete frame structures, and hence must be computationally efficient. Current modeling approaches for reinforced concrete components provide a reasonably accurate prediction of flexural and longitudinal bar slip response, while shear deformations and, in particular, post-peak shear behavior needs further development. The shear response introduced in this article is based on a mechanical approach for pre-peak, point of shear failure, and post-peak behavior of reinforced concrete columns. Flexural, shear, and longitudinal bar slip responses are simulated by individual springs in series. These springs are combined to obtain the total lateral response of the column. The column model has been implemented in OpenSees and validated using data from column tests representing a broad range of design parameters typical of older reinforced concrete frames.Keywords
This publication has 16 references indexed in Scilit:
- Seismic loss estimation of non‐ductile reinforced concrete buildingsEarthquake Engineering & Structural Dynamics, 2012
- Nonlinear Modeling of Flat-Plate SystemsJournal of Structural Engineering, 2009
- Hysteretic Model for Reinforced Concrete Columns Including the Effect of Shear and Axial Load FailureJournal of Structural Engineering, 2009
- Collapse of a nonductile concrete frame: Evaluation of analytical modelsEarthquake Engineering & Structural Dynamics, 2008
- Uniaxial Shear-Flexure Model for Reinforced Concrete ElementsJournal of Structural Engineering, 2008
- Modelling failures in existing reinforced concrete columnsCanadian Journal of Civil Engineering, 2004
- Inelastic seismic analysis of RC bridge piers including flexure-shear-axial interactionSTRUCTURAL ENGINEERING AND MECHANICS, 2002
- Seismic Analysis of RC Bridge Columns with Flexure-Shear InteractionJournal of Structural Engineering, 2001
- Seismic Analysis of Older Reinforced Concrete ColumnsEarthquake Spectra, 1999
- Reinforced Concrete Membrane Element FormulationsJournal of Structural Engineering, 1990