Developing horizontal subsurface flow constructed wetland using pumice and Chrysopogon zizanioides for tannery wastewater treatment
Open Access
- 3 July 2021
- journal article
- research article
- Published by Springer Nature in Environmental Systems Research
- Vol. 10 (1) , 1-13
Abstract
Background: High-strength wastewater defined by elevated levels of hazardous pollutants measured in BOD, heavy metals, nutrients and other toxic substances. This kind of wastewater discharged to water body without treatment from different industrial sectors that adversely affects aquatic environment and downstream water consumers. The general objective of this study is to investigate efficient substrate with selected plant type for constructed wetland to remove hazardous pollutants from tannery wastewater. This study was conducted at Modjo town, Modjo tannery PLC. Plug flow experimental study design was carried out. The substrate (Pumice) was collected around the study area and chemical characteristics were determined. Chrysopogon zizanioides was planted and grown for 5 months before running tannery wastewater for the treatment. The composite wastewater was introduced to the constructed wetland from Modjo leather industry, Ethiopia. The physicochemical analysis of the sample wastewater was done before and after treatment at four different hydraulic retention time. Results: Characterization of the untreated tannery wastewater revealed that the mean concentration of BOD5, COD, TSS, PO4-P, TP, NO3-N, TN and total chromium were 1641 ± 373.6, 6953.33 ± 339.4, 1868 ± 863.1, 88.06 ± 40.8, 144.53 ± 20.8, 116.66 ± 26.6, 650.33 ± 93.6 and 18.33 ± 6.7 mg/l respectively beyond the permissible limits. The maximum removal efficiency of the constructed wetland in pumice bed revealed that BOD5 at HRT 7and 9 days (96.42%, 96.30%), COD at HRT 5 and 7 days (96.76%, 96.91%), NO3-N at HRT 5 and 7 days (99.99%, 99.68%), TN (98.67%, 99.00%), PO4-P HRT 7and 9 days (96.97%,100%), TP at HRT 5 and 7 days (94.79%, 96.17%) and total Chromium at HRT 5 and 7 days (98.36%, 98.91%) respectively. Whereas, the removal efficiency of constructed wetland bed with gravel substrate used as a control subject with similar condition to pumice showed lower performance. The result between pumice and gravel bed was tested for their significance difference using two sample t-test statistics. Based on the test statistics, the pumice substrate perform better than the gravel significantly at 95% confidence interval, p-value = 0.01. Conclusion: Pumice substrate and Chrysopogon zizanioides have a potential ability to remove hazardous pollutants from tannery wastewater in horizontal subsurface constructed wetlands.Keywords
All Related Versions
This publication has 16 references indexed in Scilit:
- Vertical Subsurface Wetlands for Wastewater PurificationProcedia Engineering, 2012
- Constructed Wetlands for Wastewater Treatment: Five Decades of ExperienceEnvironmental Science & Technology, 2010
- Treatment of leather industry wastewater by aerobic biological and Fenton oxidation processJournal of Hazardous Materials, 2010
- Phytoremediation of chromium by model constructed wetlandBioresource Technology, 2006
- Membrane application for recovery and reuse of water from treated tannery wastewaterDesalination, 2004
- Differential antioxidative response of ascorbate glutathione pathway enzymes and metabolites to chromium speciation stress in green gram ( (L.) R.Wilczek. cv CO 4) rootsPlant Science, 2004
- Effects of plants and microorganisms in constructed wetlands for wastewater treatmentBiotechnology Advances, 2003
- Low-cost adsorbents for heavy metals uptake from contaminated water: a reviewJournal of Hazardous Materials, 2003
- The potential for constructed wetlands for wastewater treatment and reuse in developing countries: a reviewEcological Engineering, 2001
- Metal Hyperaccumulator Plants1999