A one-piece 3D printed flexure translation stage for open-source microscopy
Open Access
- 1 February 2016
- journal article
- conference paper
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 87 (2) , 025104
Abstract
Open source hardware has the potential to revolutionise the way we build scientific instruments; with the advent of readily available 3D printers, mechanical designs can now be shared, improved, and replicated faster and more easily than ever before. However, printed parts are typically plastic and often perform poorly compared to traditionally machined mechanisms. We have overcome many of the limitations of 3D printed mechanisms by exploiting the compliance of the plastic to produce a monolithic 3D printed flexure translation stage, capable of sub-micron-scale motion over a range of 8 × 8 × 4 mm. This requires minimal post-print clean-up and can be automated with readily available stepper motors. The resulting plastic composite structure is very stiff and exhibits remarkably low drift, moving less than 20 μm over the course of a week, without temperature stabilisation. This enables us to construct a miniature microscope with excellent mechanical stability, perfect for time-lapse measurements in situ in an incubator or fume hood. The ease of manufacture lends itself to use in containment facilities where disposability is advantageous and to experiments requiring many microscopes in parallel. High performance mechanisms based on printed flexures need not be limited to microscopy, and we anticipate their use in other devices both within the laboratory and beyond.Keywords
All Related Versions
Funding Information
- Queens' College, Cambridge (Research Fellowship)
- University of Cambridge, Synthetic Biology SRI (SynBioFund)
- Engineering and Physical Sciences Research Council (EP/L027151/1)
- Royal Commission for the Exhibition of 1851 (Research Fellowship)
- University of Cambridge (Teaching and Learning Innovation Fund)
This publication has 25 references indexed in Scilit:
- Foldscope: Origami-Based Paper MicroscopePLOS ONE, 2014
- Fabricating low cost and high performance elastomer lenses using hanging dropletsBiomedical Optics Express, 2014
- The Benefits of Sharing—Nice Guys and Girls do Finish First2014
- OpenSPIM: an open-access light-sheet microscopy platformNature Methods, 2013
- Mobile Digital Fluorescence Microscopy for Diagnosis of TuberculosisJournal of Clinical Microbiology, 2013
- Mobile Phone Microscopy for the Diagnosis of Soil-Transmitted Helminth Infections: A Proof-of-Concept StudyThe American Journal of Tropical Medicine and Hygiene, 2013
- Ten Simple Rules for the Open Development of Scientific SoftwarePLOS Computational Biology, 2012
- The case for open computer programsNature, 2012
- RepRap – the replicating rapid prototyperRobotica, 2011
- Mobile Phone Based Clinical Microscopy for Global Health ApplicationsPLOS ONE, 2009