Investigation on Mechanical and Microstructure Properties of Silt Improved by Titanium Gypsum-Based Stabilizer
Open Access
Abstract
Silt in the Yellow River alluvial plain is widely spread, but its uniform particle size and high roundness make it unsuitable as a subgrade filling material, while titanium gypsum (TG) is an industrial solid waste in Shandong Province, not only occupying land resources but also causing water and air pollution. In order to improve the engineering performance of silt, reduce the pollution of solid waste titanium gypsum to the environment and reduce the engineering cost, considering the engineering characteristics of titanium gypsum, it was combined in specific amounts with cement and lime to create a titanium gypsum-based stabilizer (TS) in this study. The effect of curing conditions and TS content on silt improvement was studied through laboratory experiments. The mechanical properties of the stabilized silt were investigated by unconfined compression test (UCT), and the mineral composition and pore structure were analyzed by scanning electron microscopy (SEM) test, X-ray diffraction (XRD) test, and mercury injection pore (MIP) test. The test results show that TS could effectively improve the unconfined compressive strength of silt, and the strength of stabilized silt gradually increases with the curing period and TS content. In terms of the porosity, it decreases with the increase of the curing period and TS content. From the microstructure perspective, this is mainly due to the formation of ettringite and C-S-H during the stabilization of silt by TS.Keywords
Funding Information
- Shandong Excellent Young Scientists Fund Program (2022HWYQ-016)
- Shandong Provincial Natural Science Foundation (ZR2021QE254)
- Natural Science Foundation of Jiangsu Province (BK20220273)
This publication has 39 references indexed in Scilit:
- Compressive strength development in fly ash geopolymer masonry units manufactured from water treatment sludgeConstruction and Building Materials, 2015
- Stabilization Mechanism and Effect Evaluation of Stabilized Silt with Lignin Based on Laboratory DataMarine Georesources & Geotechnology, 2014
- Control factors for the long term compressive strength of lime treated sandy clay soilTransportation Geotechnics, 2014
- Engineering properties and microstructural characteristics of cement-stabilized zinc-contaminated kaolinCanadian Geotechnical Journal, 2014
- Geotechnical properties of lime-treated gypseous soilsApplied Clay Science, 2014
- Effects of lime and cement treatment on the physicochemical, microstructural and mechanical characteristics of a plastic siltEngineering Geology, 2013
- Influence of cement addition on the geotechnical properties of an Iranian clayApplied Clay Science, 2012
- Use of Industrial Byproducts as Alumina Sources for the Synthesis of Calcium Sulfoaluminate CementsEnvironmental Science & Technology, 2011
- Strength and Modulus of Marine Clay-Cement MixesJournal of Geotechnical and Geoenvironmental Engineering, 2005
- Strength and dilatancy of a silt stabilized by a cement and fly ash mixtureCanadian Geotechnical Journal, 2002