Mixed‐matrix membranes based on Li1.6Mn1.6O4 (LMO) ultrathin nanosheet for high‐performance CO2 separation
Authors:
- 28 December 2021
- journal article
- research article
- Published by Wiley in Journal of the Chinese Chemical Society
- Vol. 69 (2) , 289-300
Abstract
Two‐dimensional flake Li1.6Mn1.6O4 (LMO) was added to the Pebax®MH 1657 (Pebax) matrix to prepare mixed‐matrix membranes (MMMs) for CO2/CH4 mixed gas separation. The average pore diameter of the LMO nanosheet was about 10.79 nm: a fast CO2 transport channel could be established in the membrane. In addition, the Li and oxygen defect site (Oδ−) in the LMO had an affinity for CO2, which improved the permeability of the membrane and the selectivity for CO2 separation. Furthermore, the ultrathin structure of LMO with large aspect ratio was also conducive to gas separation. When the LMO filling amount was 2.0 wt%, the permeation rate of pure CO2 gas of Pebax/LMO‐2.0 membrane was 117.9 Barrer, and the CO2/CH4 ideal selectivity was 18.74, which were 119.7 and 35.8% higher than Pebax membrane, respectively. The CO2/CH4 mixed gas separation results of Pebax/LMO‐2.0 membrane showed that the CO2 permeability and CO2/CH4 selectivity were 158.54 Barrer and 33.41, respectively, and were increased by 83.24 and 23.15%, compared with Pebax membrane.Keywords
Funding Information
- National Natural Science Foundation of China (21868031)
This publication has 56 references indexed in Scilit:
- Synthesis and Adsorption Properties of Li1.6Mn1.6O4 SpinelIndustrial & Engineering Chemistry Research, 2013
- Enhancement of CO2/CH4 selectivity in metal-organic frameworks containing lithium cationsMicroporous and Mesoporous Materials, 2011
- The effect of TiO2 nanoparticles on gas transport properties of Matrimid5218-based mixed matrix membranesSeparation and Purification Technology, 2011
- Carbon Dioxide Capture: Prospects for New MaterialsAngewandte Chemie International Edition, 2010
- Doping of Alkali, Alkaline-Earth, and Transition Metals in Covalent-Organic Frameworks for Enhancing CO2 Capture by First-Principles Calculations and Molecular SimulationsACS Nano, 2010
- CO2-tolerant oxygen separation membranes targeting CO2 capture applicationJournal of Membrane Science, 2009
- Facile Preparation of Three-Dimensionally Ordered Macroporous Alumina, Iron Oxide, Chromium Oxide, Manganese Oxide, and Their Mixed-Metal Oxides with High PorosityChemistry of Materials, 2007
- Novel cogeneration power system with liquefied natural gas (LNG) cryogenic exergy utilizationEnergy, 2004
- Determination of the Structural Features of Distinct Amines Important for the Absorption of CO2 and Regeneration in Aqueous SolutionIndustrial & Engineering Chemistry Research, 2003
- Surface chemistry of carbon dioxideSurface Science Reports, 1996