A STUDY OF THE EFFECT OF OPERATING CONDITIONS ON REVERSE OSMOSIS MEMBRANE PERFORMANCE WITH AND WITHOUT AIR SPARGING TECHNIQUE
- 1 January 2013
- journal article
- research article
- Published by Taylor & Francis in Chemical Engineering Communications
- Vol. 200 (1) , 1-19
Abstract
The aim of this work is to enhance the permeation flux and rejection during the reverse osmosis (RO) filtration process of simulated seawater, using gas-liquid two-phase flow to reduce the concentration polarization layer by injecting air. The effect of various operating conditions (feed concentration, flow rate, temperature, operating pressure, and gas flow rate) on RO performance was evaluated and optimized. The central composite design (CCD) technique was used to find the optimal operating conditions. The objective function (Response) was the flux of permeate and salt rejection. The coefficients of the proposed model were found, and the significant and nonsignificant parameters for the proposed model were checked by the F-test method. In order to ensure a good model the test for significance of the regression model (F-test) was performed by applying the analysis of variance (ANOVA). It was found that the flux and the rejection of NaCl solution throughout the RO are dependent on the operating conditions in the following sequence: concentration > pressure > temperature > flow rate. In addition, the results showed that the experimental data have good agreement with the values predicted by the response model for permeation flux and salt rejection. The results showed a positive effect of constant gas-liquid two-phase flow on permeate flux and salt rejection. At low liquid flow rates, better improvement was achieved with a horizontally installed membrane. Using the gas-liquid two-phase flow technique with an injection factor of 0.878, slug flow pattern, superficial air velocity of 1.5923 m/s, and superficial liquid velocity of 0.221 m/s, the permeate flux increased from 3.406 to 5.676 kg/m2.h and salt rejection increased from 85% to 91%.Keywords
This publication has 30 references indexed in Scilit:
- Response surface modeling and optimization of copper removal from aqua solutions using polymer assisted ultrafiltrationJournal of Membrane Science, 2007
- The use of gas bubbling to enhance membrane processesJournal of Membrane Science, 2003
- Effect of feed temperature on permeate flux and mass transfer coefficient in spiral-wound reverse osmosis systemsDesalination, 2002
- Influence of inclination on gas-sparged cross-flow ultrafiltration through an inorganic tubular membraneJournal of Membrane Science, 2002
- How slug flow can improve ultrafiltration flux in organic hollow fibresJournal of Membrane Science, 1997
- Gas sparging to enhance permeate flux in ultrafiltration using hollow fibre membranesJournal of Membrane Science, 1996
- Flux enhancements with gas sparging in downwards crossflow ultrafiltration: performance and mechanismJournal of Membrane Science, 1996
- Selective properties of ultrafiltration membranes from the standpoint of concentration polarization and adsorption phenomenaJournal of Membrane Science, 1995
- Gas—liquid two-phase cross-flow ultrafiltration of BSA and dextran solutionsJournal of Membrane Science, 1994
- Dean vortices with wall flux in a curved channel membrane systemJournal of Membrane Science, 1993