Thermal decomposition of solder flux activators under simulated wave soldering conditions
- 5 June 2017
- journal article
- research article
- Published by Emerald Publishing in Soldering & Surface Mount Technology
- Vol. 29 (3) , 133-143
Abstract
Purpose: The aim of this work is to investigate the decomposition behaviour of the activator species commonly used in the wave solder no-clean flux systems and to estimate the residue amount left after subjecting the samples to simulated wave soldering conditions. Design/methodology/approach: Changes in the chemical structure of the activators were studied using Fourier transform infrared spectroscopy technique and were correlated to the exposure temperatures within the range of wave soldering process. The amount of residue left on the surface was estimated using standardized acid-base titration method as a function of temperature, time of exposure and the substrate material used. Findings: The study shows that there is a possibility of anhydride-like species formation during the thermal treatment of fluxes containing weak organic acids (WOAs) as activators (succinic and DL-malic). The decomposition patterns of solder flux activators depend on their chemical nature, time of heat exposure and substrate materials. Evaporation of the residue from the surface of different materials (laminate with solder mask, copper surface or glass surface) was found to be more pronounced for succinic-based solutions at highest test temperatures than for adipic acid. Less left residue was found on the laminate surface with solder mask (∼5-20 per cent of initial amount at 350°C) and poorest acid evaporation was noted for glass substrates (∼15-90 per cent). Practical implications: The findings are attributed to the chemistry of WOAs typically used as solder flux activators. The results show the importance WOA type in relation to its melting/boiling points and the impact on the residual amount of contamination left after soldering process. Originality/value: The results show that the evaporation of the flux residues takes place only at significantly high temperatures and longer exposure times are needed compared to the temperature range used for the wave soldering process. The extended time of thermal treatment and careful choice of fluxing technology would ensure obtaining more climatically reliable product.Keywords
This publication has 21 references indexed in Scilit:
- Characterizing Corrosion Effects of Weak Organic Acids Using a Modified Bono TestJournal of Electronic Materials, 2013
- A simple method to evaluate, correlate and predict boiling and flash points of alkynesJournal of the Brazilian Chemical Society, 2012
- On the electrochemical migration mechanism of tin in electronicsCorrosion Science, 2011
- Corrosion failure due to flux residues in an electronic add-on deviceEngineering Failure Analysis, 2010
- Characterizing the weak organic acids used in low solids fluxesJournal of Electronic Materials, 1999
- The impact of temperature and humidity conditions on surface insulation resistance values for various fluxesSoldering & Surface Mount Technology, 1999
- Use of surface insulation resistance and contact angle measurements to characterize the interactions of three water soluble fluxes with FR-4 substratesIEEE Transactions on Components, Packaging, and Manufacturing Technology: Part B, 1997
- Weak Organic Acids and Surface Insulation ResistanceCircuit World, 1995
- A Model of the Solder Flux Reaction; Reactions at the Metal/ Metal Oxide/Electrolyte Solution InterfaceCircuit World, 1995
- The Influence of Flux Residues on the Quality of Electronic AssembliesSoldering & Surface Mount Technology, 1994