Strength and Fracture Toughness of Hardox-400 Steel
Open Access
Abstract
This paper presents results of strength and fracture toughness properties of low-carbon high-strength Hardox-400 steel. Experimental tests were carried out for specimens of different thickness at wide temperature range from −100 to 20 °C. The dependences of the characteristic of material strength and fracture toughness on temperature based on experimental data are shown. Numerical calculation of the stress and strain distributions in area before crack tip using the finite element method (FEM) was done. Based on results of numerical calculation and observation of the fracture surfaces by scanning electron microscope (SEM), the critical local stress level at which brittle fracture takes place was assessed. Consideration of the levels of stress and strain in the analysis of the metal state at the tip of the crack allowed to justify the occurrence of the brittle-to-ductile fracture mechanism. On the basis of the results of stretch zone width measurements and stress components, the values of fracture toughness at the moment of crack initiation were calculated.Keywords
Funding Information
- Narodowe Centrum Nauki (2017/25/N/ST8/00179)
- Ministerstwo Edukacji i Nauki (01.0.08.00/2.01.01.01.0008)
This publication has 36 references indexed in Scilit:
- Modified master curve of ultra high strength steelInternational Journal of Pressure Vessels and Piping, 2012
- Studies of fracture processes in Cr–Mo–V ferritic steel with various types of microstructuresInternational Journal of Pressure Vessels and Piping, 2010
- On Factors Affecting the Phase Transformation and Mechanical Properties of Cold-Rolled Transformation-Induced-Plasticity–Aided SteelMetallurgical and Materials Transactions A, 2008
- Influence of bainite/martensite-content on the tensile properties of low carbon dual-phase steelsMaterials Science and Engineering: A, 2008
- An alternative formulation of the Ritchie–Knott–Rice local fracture criterionEngineering Fracture Mechanics, 2006
- Effects of heat treatment and alloying elements on the microstructures and mechanical properties of 0.15 wt pct C transformation-induced plasticity-aided cold-rolled steel sheetsMetallurgical and Materials Transactions A, 2001
- An engineering approach to assess constraint effects on cleavage fracture toughnessEngineering Fracture Mechanics, 2001
- Elastoplastic three dimensional crack border field—I. Singular structure of the fieldEngineering Fracture Mechanics, 1993
- Relationships between the J-integral and the crack opening displacement for stationary and extending cracksJournal of the Mechanics and Physics of Solids, 1981
- On the relationship between critical tensile stress and fracture toughness in mild steelJournal of the Mechanics and Physics of Solids, 1973