On the simulation of multi‐stage forming processes: invariance under change of the reference configuration
Authors:
- 23 July 2012
- journal article
- research article
- Published by Wiley in Materialwissenschaft und Werkstofftechnik
- Vol. 43 (7) , 617-625
Abstract
The need to change the reference configuration can naturally appear during the numerical simulation of multi‐stage metal forming processes. In the current work, a refined approach to the consideration of previously induced plastic anisotropy is discussed, which is based on such configuration change. The model of finite strain viscoplasticity proposed by Shutov and Kreißig is considered in this study as a practical tool, suitable to capture the evolution of mechanical properties of material during inelastic deformation. The initial plastic anisotropy can be considered within this model by a special choice of initial conditions imposed on the relevant internal variables. A simple transformation law which is based on the isochoric change of the reference configuration is obtained in the current study. This transformation allows to obtain relevant initial conditions with respect to a new reference configuration. Thus, the initial conditions are formulated using the simulation results from the foregoing loading. The advocated approach is exemplified by the numerical simulation of equal channel angular pressing of cylindrical billets. The plastic anisotropy accumulated during a single ECAP pass is estimated using a series of virtual tension tests. These tests were performed on samples cut from processed billet with their gage lengths in different directions. Finally, the impact of the plastic anisotropy on the rotation of the workpiece within the output channel during ECAP is numerically estimated.Keywords
This publication has 26 references indexed in Scilit:
- A phenomenological model of finite strain viscoplasticity with distortional hardeningZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 2011
- Evolution of subsequent yield surfaces and elastic constants with finite plastic deformation. Part II: A very high work hardening aluminum alloy (annealed 1100 Al)International Journal of Plasticity, 2010
- Evolution of subsequent yield surfaces and elastic constants with finite plastic deformation. Part III: Yield surface in tension–tension stress space (Al 6061–T 6511 and annealed 1100 Al)International Journal of Plasticity, 2010
- Experimental investigation and numerical simulation of the incremental deformation of a 42CrMo4 steelMaterialwissenschaft und Werkstofftechnik, 2010
- A study of flow characteristics of nanostructured Al-6082 alloy produced by ECAP under upsetting testJournal of Materials Processing Technology, 2008
- Influence of back stresses in parts forming on crashworthinessJournal of Materials Processing Technology, 2005
- A comparative study of kinematic hardening rules at finite deformationsInternational Journal of Non-Linear Mechanics, 2004
- Finite thermoplasticity based on isomorphismsInternational Journal of Plasticity, 2003
- Suitability of yield functions for the approximation of subsequent yield surfacesInternational Journal of Plasticity, 1996
- Materials processing by simple shearMaterials Science and Engineering: A, 1995