Electroosmotic Flow Pump on Transparent Polyimide Substrate Fabricated Using Hot Embossing
Authors:
- 1 February 2013
- journal article
- Published by Trans Tech Publications, Ltd. in Applied Mechanics and Materials
- Vol. 300-301, 1356-1359
Abstract
Improved fabrication processes of an all-polyimide micro electroosmotic flow pump using hot embossing are described. Microchannels in the micropump were fabricated by hot embossing on a transparent polyimide substrate. A silicon micromachined mold was pressed into the transparent polyimide substrate at a temperature of 300 oC to form microchannel patterns on the substrate. The depth and width of the microchannels were 25 μm and 50 μm, respectively. A UV ozone treatment was performed to improve adhesion between the transparent polyimide substrate and film capping layer. This UV ozone treatment enhanced adhesion and resulted in the reduction of the adhesion temperature as low as 100 oC, and nearly no deformation of the microchannels was observed. As a result, the electroosmotic flow pump exhibited the flow rate of 0.7 μl/min when a voltage of 50 V was given between the electrodes separated 20 mm each other.Keywords
This publication has 13 references indexed in Scilit:
- Flexible Polyimide Micropump Fabricated Using Hot EmbossingJapanese Journal of Applied Physics, 2011
- Interactions of electrical fields with fluids:laboratory-on-a-chip applicationsIET Nanobiotechnology, 2008
- Hot embossing for micropatterned cell substratesBiomaterials, 2004
- A planar electroosmotic micropumpJournal of Microelectromechanical Systems, 2002
- Nanoscale patterning of magnetic islands by imprint lithography using a flexible moldApplied Physics Letters, 2002
- Microfabricated plastic chips by hot embossing methods and their applications for DNA separation and detectionSensors and Actuators B: Chemical, 2001
- Nanoimprint lithography for a large area pattern replicationMicroelectronic Engineering, 1999
- Nanoscale silicon field effect transistors fabricated using imprint lithographyApplied Physics Letters, 1997
- Imprint lithography with sub-10 nm feature size and high throughputMicroelectronic Engineering, 1997
- Imprint Lithography with 25-Nanometer ResolutionScience, 1996