An Ultra-Broadband Energy Selective Surface Design Method: From Filter Circuits to Metamaterials
- 19 May 2023
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 71 (7) , 5865-5873
Abstract
A novel design method for ultra-broadband energy selective surface (ESS) is presented in this paper based on the equivalent theory from filter circuits to metamaterial units. This method provides a new way of designing ESS in ultra-broadband with low insertion loss and high shielding efficiency from the perspective of filter circuit topology. It is illustrated and verified with a three layer ultra-broadband ESS. Firstly, a third-order filter with a switching bandpass to bandstop in C to Ku band is designed and optimized. Then, the filter is mapped to a physical model of a three-layer ESS which has a nonlinear transmission response for low-intensity radiation field (LIRF) and high-intensity radiation field (HIRF) in C/X/Ku-band. The three ESS prototypes are fabricated and measured in three different band waveguides to prove the design method of the ESS proposed in ultra-broadband. Simulated and measured results demonstrate that low insertion loss and high shielding efficiency at the same time can be obtained under low and high incident power levels, respectively, where the 1 dB loss and 23 dB shielding bandwidth cover from 5.4 GHz to 14.45 GHz. Furthermore, the insertion loss is less than 0.5 dB in the frequency band of 5.45 GHz to 13.8 GHz and maximum shielding effectiveness reaches 25 dB at 10 GHz.Keywords
Funding Information
- National Natural Science Foundation of China (62293491, 62101564)
- Hunan Provincial Natural Science Foundation of China (2022JJ20045)
This publication has 31 references indexed in Scilit:
- A spatial power limiter using a nonlinear frequency selective surfaceInternational Journal of RF and Microwave Computer-Aided Engineering, 2017
- Nonlinear Multiconductor Transmission Line Analysis of Broadband Switching MetamaterialsIEEE Transactions on Antennas and Propagation, 2016
- Varactor-Tunable Second-Order Bandpass Frequency-Selective Surface With Embedded Bias NetworkIEEE Transactions on Antennas and Propagation, 2016
- A Method of Designing a Field-Controlled Active Frequency Selective SurfaceIEEE Antennas and Wireless Propagation Letters, 2014
- Broadband Switching Nonlinear MetamaterialIEEE Antennas and Wireless Propagation Letters, 2014
- Protecting the weak from the strongNature, 2014
- Analysis of High Intensity Radiated Field Coupling into Aircraft Using the Method of MomentsIEEE Transactions on Electromagnetic Compatibility, 2013
- A Novel Method of Energy Selective Surface for Adaptive HPM/EMP ProtectionIEEE Antennas and Wireless Propagation Letters, 2013
- Efficient Analysis of Frequency-Selective Surfaces by a Simple Equivalent-Circuit ModelIEEE Antennas and Propagation Magazine, 2012
- A Frequency-Selective Wall for Interference Reduction in Wireless Indoor EnvironmentsIEEE Antennas and Propagation Magazine, 2006