3D-Printed Insole for Measuring Ground Reaction Force and Center of Pressure During Walking
Open Access
Abstract
Ground reaction force (GRF) and center of pressure (COP) during walking are two important measures that could be used in a range of applications, from the control of devices such as exoskeletons to clinical assessments. Recording these measures requires fixed laboratory equipment such as force plates or expensive portable insoles. We present an alternative approach by developing a 3D-printed insole that uses pneumatic chambers and pressure sensors to estimate the net GRF and the anterior–posterior COP position. The intentionally simple design, using just two pneumatic chambers, can be fabricated using standard 3D printing technology and readily available soft materials. We used experimentally recorded data from a motion capture system along with parameter identification techniques to characterize and validate the insole while walking at different speeds. Our results showed that the insole was capable of withstanding repeated loading during walking—up to 1.2 times the body weight—and possessed a bandwidth high enough to capture gait dynamics. The identified models could estimate the GRF and the anterior–posterior COP position with less than 9% error. These results compare favourably with those of commercially available instrumented insoles and can be obtained at a fraction of their cost. This low-cost yet effective solution could assist in applications where it is important to record gait outside of laboratory conditions, but the cost of commercial solutions is prohibitive.Keywords
Funding Information
- University of Wollongong
This publication has 35 references indexed in Scilit:
- MultiSenseBadminton: Wearable Sensor–Based Biomechanical Dataset for Evaluation of Badminton PerformanceScientific Data, 2024
- Digital manufacturing of personalised footwear with embedded sensorsScientific Reports, 2023
- Running-Related Biomechanical Risk Factors for Overuse Injuries in Distance Runners: A Systematic Review Considering Injury Specificity and the Potentials for Future ResearchSports Medicine, 2022
- A Review of 3D‐Printable Soft Pneumatic Actuators and Sensors: Research Challenges and OpportunitiesAdvanced Intelligent Systems, 2021
- Soft Pneumatic Sensing Chambers for Generic and Interactive Human–Machine InterfacesAdvanced Intelligent Systems, 2019
- The use of wearable devices for walking and running gait analysis outside of the lab: A systematic reviewGait & Posture, 2018
- Embedded sensor insole for wireless measurement of gait parametersAustralasian Physics & Engineering Sciences in Medicine, 2013
- Foot Pressure Pattern and its Correlation With Knee Range of Motion Limitations for Individuals With Medial Knee OsteoarthritisArchives of Physical Medicine and Rehabilitation, 2013
- Foot pressure patterns during gaitJournal of Biomedical Engineering, 1985
- Kinematic and kinetic patterns in human gait: Variability and compensating effectsHuman Movement Science, 1984