A Wafer-Level Packaged CMOS MEMS Pirani Vacuum Gauge
- 13 August 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 68 (10) , 5155-5161
Abstract
In this article, we report a wafer-level packaged Pirani vacuum gauge using the proprietary InvenSense CMOS MEMS technology. The micro Pirani vacuum gauge features three serpentine-shaped molybdenum thermistors on the suspended silicon-on-insulator (SOI) bridges, while the wiring gap of each serpentine-shaped silicon microbridge is 1.6 ${ {\mu }}\text{m}$ . For the vacuum range of $5\times 10^{-{4}}$ –760 Torr, the CMOS MEMS Pirani gauge configured with a constant temperature interface circuit achieves a sensitivity of 0.414 V/Torr in a very fine vacuum regime, while its heating power is less than 21.3 mW. Moreover, the measured output of the micro Pirani gauge shows good agreement with a semi-empirical model, while the model predicts that the proposed Pirani gauge can measure a vacuum pressure as low as $2.6\times 10^{-{4}}$ Torr. The performance achieved by this Pirani vacuum gauge combined with its high level of integration makes it a promising Internet of Things (IoT) sensing node for vacuum monitoring in the industry.Keywords
Funding Information
- Natural Science Foundation of Guangdong Province (2020A1515011555)
- Natural Science Foundation of Shenzhen University (860-2110309)
- High-End Talent Research Funding (827-000451)
This publication has 21 references indexed in Scilit:
- Performance improvement of CMOS-MEMS Pirani vacuum gauge with hollow heater design2015
- Versatile CMOS-MEMS integrated piezoelectric platform2015
- Pressure sensing method based on the transient response of a thermally actuated micro-wireSensors and Actuators A: Physical, 2015
- Optimized MEMS Pirani sensor with increased pressure measurement sensitivity in the fine and rough vacuum regimesJournal of Vacuum Science & Technology A, 2014
- Exploiting the transient response of a Pirani gauge sensor for beyond atmospheric pressure measurement2013
- A micro-machined Pirani gauge for vacuum measurement of ultra-small sized vacuum packagingSensors and Actuators A: Physical, 2010
- Miniature and MEMS-type vacuum sensors and pumpsVacuum, 2009
- Microstructured vacuum gauges and their future perspectivesVacuum, 2007
- Wafer-to-wafer bonding of nonplanarized MEMS surfaces using solderJournal of Micromechanics and Microengineering, 2001
- A sensitive Pirani vacuum sensor and the electrothermal SPICE modellingSensors and Actuators A: Physical, 1996