Study on Dry Etching of iCVD‐Grown pV3D3 Dielectric Polymer Film
Authors:
- 23 June 2025
- journal article
- Published by Wiley in Small Methods
- Vol. 10 (2) , e2500744
Abstract
Polymer dielectric materials are promising candidates for next‐generation electronics due to their cost‐effectiveness, molecular‐level structural tunability, and mechanical deformability. Among various fabrication techniques, initiated chemical vapor deposition (iCVD) enables high‐purity polymer dielectric films with robust insulating properties. However, the lack of high‐resolution patterning techniques has hindered their integration into high‐density electronics. Here, the dry etching process of an organosilicon polymer dielectric layer fabricated via iCVD process is systematically investigated by using reactive ion etching (RIE) with CF 4 plasma. Direct mode RIE enabled a higher etch rate owing to the combined physical and chemical etching mechanisms, whereas remote mode RIE provided uniform etching with minimal perturbation on the surface morphology. Furthermore, introducing O 2 gas in CF 4 RIE significantly enhanced the etch rate in both modes, reaching ≈1 000 Å min −1 , despite localized pattern distortions caused by SiO x formation. To validate its applicability, an ultrathin (≈33 nm), RIE‐patterned polymer dielectric layer was implemented in an AlGaN/GaN‐based metal‐insulator‐semiconductor high electron mobility transistor (MISHEMT), where the effective gate modulationwas achieved, along with a decent transconductance (≈1.5 mS) and a high current on/off ratio (>10 8 ). This study establishes a systematic, high‐resolution dry etching method for the vapor‐phase deposited, crosslinked polymer dielectric layer, paving the way toward high‐density electronics.Keywords
This publication has 88 references indexed in Scilit:
- Intrinsically Photopatternable High‐k Polymer Dielectric for Flexible ElectronicsAdvanced Functional Materials, 2024
- Large‐Scale, Low‐Power Nonvolatile Memory Based on Few‐Layer MoS2 and Ultrathin Polymer DielectricsAdvanced Electronic Materials, 2019
- Recent Progress in Aromatic Polyimide Dielectrics for Organic Electronic Devices and CircuitsAdvanced Materials, 2019
- Recent Progress on High‐Capacitance Polymer Gate Dielectrics for Flexible Low‐Voltage TransistorsAdvanced Functional Materials, 2018
- Initiated Chemical Vapor Deposition: A Versatile Tool for Various Device ApplicationsAdvanced Engineering Materials, 2017
- Synthesis of Ultrathin, Homogeneous Copolymer Dielectrics to Control the Threshold Voltage of Organic Thin‐Film TransistorsAdvanced Functional Materials, 2016
- Large‐Scale Precise Printing of Ultrathin Sol–Gel Oxide Dielectrics for Directly Patterned Solution‐Processed Metal Oxide Transistor ArraysAdvanced Materials, 2015
- A Surface Tailoring Method of Ultrathin Polymer Gate Dielectrics for Organic Transistors: Improved Device Performance and the Thermal Stability ThereofAdvanced Functional Materials, 2015
- Remarkable Enhancement of Hole Transport in Top‐Gated N‐Type Polymer Field‐Effect Transistors by a High‐k Dielectric for Ambipolar Electronic CircuitsAdvanced Materials, 2012
- Principles of Plasma Discharges and Materials Processing2005