Organic‐Additive‐Derived Cathode Electrolyte Interphase Layer Mitigating Intertwined Chemical and Mechanical Degradation for Sulfide‐Based Solid‐State Batteries
Authors:
Open Access
- 9 March 2023
- journal article
- research article
- Published by Wiley in Advanced Energy Materials
- Vol. 13 (16)
Abstract
Keeping both the chemical and physical state of the electrode–electrolyte interface intact is one of the greatest challenges in achieving solid‐state batteries (SSBs) with longer cycle lives. Herein, the use of organic electrolyte additives in the cathode electrolyte interphase (CEI) layer to mitigate the intertwined chemical and mechanical degradation in sulfide‐based SSBs is demonstrated. Lithium difluorobis(oxalato)phosphate (LiDFBOP) and argyrodite (Li6PS5Cl) are used as a model system, with the LiDFBOP‐derived CEI layer induced by irreversible oxidation above 4.12 V (vs Li+/Li) during the formation cycle exhibiting dual functions. This CEI layer retards the rate of chemical degradation between the cathode active particles and solid electrolytes at high charging potential and helps maintain intimate physical contact even at a low stack pressure of 0.75 MPa. The improved physical contact enables delivery of a high initial capacity, while chemical stability suppressing the sulfite or sulfate formation has a more dominant effect on the long‐term cycle stability. This study presents a new perspective and strategies for designing cathode coating materials for sulfide‐based SSBs beyond the typically used inorganic oxide materials.Keywords
Funding Information
- National Research Foundation of Korea (2017HH0034)
- National Research Council of Science and Technology (CAP21042‐000)
This publication has 60 references indexed in Scilit:
- A bi-functional lithium difluoro(oxalato)borate additive for lithium cobalt oxide/lithium nickel manganese cobalt oxide cathodes and silicon/graphite anodes in lithium-ion batteries at elevated temperaturesElectrochimica Acta, 2014
- Space–Charge Layer Effect at Interface between Oxide Cathode and Sulfide Electrolyte in All-Solid-State Lithium-Ion BatteryChemistry of Materials, 2014
- A rocking chair type all-solid-state lithium ion battery adopting Li2O–ZrO2 coated LiNi0.8Co0.15Al0.05O2 and a sulfide based electrolyteJournal of Power Sources, 2014
- Electrolyte additive combinations that enhance performance of high-capacity Li1.2Ni0.15Mn0.55Co0.1O2–graphite cellsElectrochimica Acta, 2013
- New class of nonaqueous electrolytes for long-life and safe lithium-ion batteriesNature Communications, 2013
- Lithium Tetrafluoro Oxalato Phosphate as Electrolyte Additive for Lithium-Ion CellsElectrochemical and Solid-State Letters, 2010
- Challenges for Rechargeable Li BatteriesChemistry of Materials, 2009
- Building better batteriesNature, 2008
- A review on electrolyte additives for lithium-ion batteriesJournal of Power Sources, 2006
- Electroceramics: Characterization by Impedance SpectroscopyAdvanced Materials, 1990