Thermal properties of autoclave and out-of-autoclave carbon fiber-epoxy composites with different fiber weave configurations
Open Access
- 8 May 2018
- journal article
- research article
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 52 (29) , 4075-4085
Abstract
Thermal expansion, specific heat, diffusivity, and conductivity of carbon fiber-epoxy composites were studied using autoclave and out-of-autoclave prepregs with three different fabric weaves including unidirectional, eight-harness satin, and plain weave. For this purpose, light flash analysis was utilized where the implications of using anisotropic materials were studied. Results indicated that density, thermal expansion, conductivity, and diffusivity were strongly influenced by the fiber configuration of the sample. This phenomenon was attributed to the difference in fiber volume fraction induced by the different weaves of the fabric. Nevertheless, specific heat was similar for all the samples regardless of fabric type or resin formulation. Finally, thermal properties of tetrafluoroethylene release film were presented to analyze the tool-part heat transfer during manufacturing. This release film showed thermal conductivity three times lower than carbon fiber-epoxy samples indicating that the film could be an important contributor to thermal lag between tool and part.Keywords
This publication has 14 references indexed in Scilit:
- Prediction of residual stresses and distortion in carbon fiber‐epoxy composite parts due to curing process using finite element analysisJournal of Applied Polymer Science, 2012
- Effects of variation in autoclave pressure, temperature, and vacuum-application time on porosity and mechanical properties of a carbon fiber/epoxy compositeJournal of Composite Materials, 2011
- Online measurement of thermal diffusivity during cure of an epoxy compositePolymer Testing, 2006
- Influence of the strain rate on the uniaxial tensile behavior of 4-step 3D braided compositesComposites Part A: Applied Science and Manufacturing, 2005
- Measurement of thermal conductivity for fibre-reinforced compositesComposites Part A: Applied Science and Manufacturing, 2004
- Thermal Property Measurements During Curing of Thermoset Resins Using Steady Periodic ConditionsJournal of Reinforced Plastics and Composites, 2002
- Thermal Diffusivity of Semitransparent Materials Determined by the Laser-Flash Method Applying a New Analytical ModelInternational Journal of Thermophysics, 1998
- Temperature and Finite Pulse-Time Effects in the Flash Method for Measuring Thermal DiffusivityJournal of Applied Physics, 1963
- Pulse Method of Measuring Thermal Diffusivity at High TemperaturesJournal of Applied Physics, 1963
- Flash Method of Determining Thermal Diffusivity, Heat Capacity, and Thermal ConductivityJournal of Applied Physics, 1961