Magnetorheological Polishing Based on Honing Vertical Mechanism for Inner Surface of Titanium Alloy Pipes
Open Access
- 8 March 2024
- journal article
- research article
- Published by MDPI AG in Lubricants
- Vol. 12 (3) , 86
Abstract
Recently, high internal surfaces for titanium alloy pipes have been required due to the increment of various applications such as aerospace components. In this work, vertical magnetorheological polishing (VMRP) is carried out to achieve high polishing performance on the internal surface of the titanium alloy pipe. A series of comparative experiments were conducted to investigate the polishing mechanism of magnetorheological polishing (MRP) fluid and enhance the polishing performance. It is shown from the experimental results that the VMRP method under the opposite polarity arrangement improves the surface roughness from 47.85% to 83.34% by reducing unwanted vibration and noise during operation. This provides nanoscale surface polishing quality, while such a precision cannot be achieved from the previous horizontal MR polishing apparatus method. It is found that under a 2700 cycle polishing time, a polishing process combining a rough and fine polishing approach with a combination of different particle diameters results in an axial surface roughness of 0.05 μm and circumferential surface roughness of 0.038 μm, respectively. It is also identified that the axial surface roughness of 0.04 μm–0.041 μm is achieved through the combination of high- and low-speed polishing process after 1602 cycles.Keywords
All Related Versions
Funding Information
- National Natural Science Foundation of China (52005085)
This publication has 25 references indexed in Scilit:
- Magnet arrangements in a magnetic field generator for magnetorheological finishingInternational Journal of Mechanical Sciences, 2019
- Modelling of surface roughness in a new magnetorheological honing process for internal finishing of cylindrical workpiecesInternational Journal of Mechanical Sciences, 2018
- Rheological behaviour of Magnetorheological polishing fluid for Si polishingMaterials Today: Proceedings, 2017
- Enhanced yield stress of magnetorheological fluids with dimer acidMaterials Letters, 2015
- Analysis of forces on the freeform surface in magnetorheological fluid based finishing processInternational Journal of Machine Tools and Manufacture, 2013
- Nanofinishing of a typical 3D ferromagnetic workpiece using ball end magnetorheological finishing processInternational Journal of Machine Tools and Manufacture, 2012
- Titanium alloy production technology, market prospects and industry developmentMaterials & Design (1980-2015), 2011
- Design and development of nanofinishing process for 3D surfaces using ball end MR finishing toolInternational Journal of Machine Tools and Manufacture, 2011
- Effect of fluid composition on nanofinishing of single-crystal silicon by magnetic field-assisted finishing processThe International Journal of Advanced Manufacturing Technology, 2011
- Magnetorheological finishing process for hard materials using sintered iron-CNT compound abrasivesInternational Journal of Machine Tools and Manufacture, 2009